44610
1.REMOVE BRAKE BOOSTER ASSEMBLY
31453
2.DISCONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS
Remove the clip and clutch master cylinder push rod clevis pin, and disconnect the clutch master cylinder push rod clevis from the clutch pedal sub-assembly.
31434
3.DISCONNECT CLUTCH RESERVOIR TUBE
Using pliers, grip the claws of the clip and slide the clip to disconnect the clutch reservoir tube from the clutch master cylinder assembly.
Use a container to catch the fluid.
4.DISCONNECT CLUTCH LINE
Using a (10 mm) union nut wrench, disconnect the clutch line.
Use a container to catch the fluid.
31410
5.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
Remove the 2 nuts and clutch master cylinder assembly.
Remove the gasket from the clutch master cylinder assembly.