Home › Drivetrain › EB62 MANUAL TRANSMISSION / TRANSAXLE › OUTPUT SHAFT › 2011.10–2013.07
RM19V0EQ _52 Drivetrain _014584 EB62 MANUAL TRANSMISSION / TRANSAXLE _0074004 OUTPUT SHAFT A

EB62 MANUAL TRANSMISSION / TRANSAXLE  OUTPUT SHAFT  DISASSEMBLY  


PROCEDURE

Hide 1.INSPECT 1ST GEAR THRUST CLEARANCE

Hide 2.INSPECT 2ND GEAR THRUST CLEARANCE

Hide 3.INSPECT 1ST GEAR RADIAL CLEARANCE

Hide 4.INSPECT 2ND GEAR RADIAL CLEARANCE

Hide 33429B 5.REMOVE 6TH DRIVEN GEAR

a.
C199105
0.823,1.563 0.823,0.854 0.823,0.854 0.458,0.854 false 0.667,1.677 0.667,0.854 false 2.677,1.146 2.344,0.479 false 2.344,0.479 2.167,0.479 false 2.646,1.26 2.344,0.479 false 2.625,1.365 2.333,0.49 false 2.458,1.083 2.125,1.083 false 2.438,1.24 2.302,1.24 2.302,1.24 2.302,1.083 false 0.542,2.24 0.354,2.354 0.354,2.354 0.354,2.521 false 0.135,0.792 0.583,1.219 0.448,0.427 10 false SST 0.229,2.563 0.646,2.823 0.417,0.26 10 false SST 1.854,0.406 2.313,0.688 0.458,0.281 10 false SST 1.813,1.01 2.24,1.229 0.427,0.219 10 false SST

Using SST, remove the rear output shaft bearing and 6th driven gear from the output shaft.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04021, 09957-04010, 09958-04011)
09950-60010  (09951-00180, 09951-00270, 09952-06010)


Hide 33431C 6.REMOVE OUTPUT GEAR SPACER

a.
C199106

Remove the output gear spacer from the output shaft.


Hide 33422B 7.REMOVE 4TH DRIVEN GEAR

a.
C199107
2.188,0.531 2.49,0.531 false 2.458,0.698 2.323,0.698 2.323,0.698 2.323,0.531 false 2.198,1.458 2.313,1.094 2.313,1.094 2.208,1.094 false 2.896,1.458 2.802,1.104 2.802,1.104 2.938,1.104 false 1.896,0.448 2.354,0.646 0.458,0.198 10 false SST 1.906,1.021 2.365,1.219 0.458,0.198 10 false SST 2.99,1.031 3.365,1.365 0.375,0.333 10 false SST

Using SST and a press, press out the 5th driven gear and 4th driven gear from the output shaft.

SST
09527-10011  
09950-40011  (09957-04010)
09950-60010  (09951-00180, 09951-00270, 09952-06010)

NOTICE:

Support the output shaft by hand to prevent it from falling.



Hide 33431C 8.REMOVE OUTPUT GEAR SPACER

a.
C199108

Remove the output gear spacer from the output shaft.


Hide 33332 9.REMOVE 2ND GEAR

a.
C199109
0.458,0.75 0.76,0.75 0.76,0.75 0.76,1.219 false 0.615,1.344 0.615,0.75 false 0.469,2.031 0.729,2.031 false 2.229,1.375 2.344,1.375 2.344,1.375 2.406,1.677 false 2.667,0.844 2.25,0.844 false 2.615,1.031 2.333,1.031 2.333,1.031 2.333,0.844 false 2.635,0.938 2.333,0.938 false 0.479,2.5 0.188,2.5 0.188,2.5 0.188,2.844 false 0.135,0.667 0.563,0.927 0.427,0.26 10 false SST 0.156,1.948 0.552,2.208 0.396,0.26 10 false SST 1.938,1.292 2.375,1.552 0.438,0.26 10 false SST 1.948,0.771 2.333,1.052 0.385,0.281 10 false SST 0.083,2.885 0.521,3.135 0.438,0.25 10 false SST

Using SST, remove the 3rd driven gear and 2nd gear from the output shaft.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04020, 09954-04030, 09955-04021, 09957-04010, 09958-04011)
09950-60010  (09951-00180, 09951-00270, 09952-06010)


Hide 33332B 10.REMOVE 2ND GEAR NEEDLE ROLLER BEARING

a.
C199110

Remove the 2nd gear needle roller bearing from the output shaft.


Hide 33356A 11.REMOVE INNER 2ND GEAR BEARING RACE

a.
C199111

Remove the inner 2nd gear bearing race from the output shaft.


Hide 33037B 12.REMOVE NO. 1 SYNCHRONIZER RING SET (for 2nd Gear)

a.
C194361

Remove the No. 1 synchronizer ring set (for 2nd Gear) from the reverse gear.


Hide 33331 13.REMOVE REVERSE GEAR

a.
C287184

Remove the reverse gear from the No. 1 transmission clutch hub.


Hide 33365 14.REMOVE NO. 1 SYNCHROMESH SHIFTING KEY

a.
C199112

Remove the 3 No. 1 synchromesh shifting keys from the No. 1 transmission clutch hub.


Hide 33361 15.REMOVE NO. 1 TRANSMISSION CLUTCH HUB

a.
C199113

Remove the No. 1 transmission clutch hub from the output shaft.


Hide 33037B 16.REMOVE NO. 1 SYNCHRONIZER RING SET (for 1st Gear)

a.
C194365

Remove the No. 1 synchronizer ring set (for 1st Gear) from the 1st gear.


Hide 33335 17.REMOVE 1ST GEAR

a.
C194366

Remove the 1st gear from the output shaft.


Hide 33335C 18.REMOVE 1ST GEAR NEEDLE ROLLER BEARING

a.
C194367

Remove the 1st gear needle roller bearing from the output shaft.


Hide 33345 19.REMOVE 1ST GEAR BUSH

a.
C194368

Remove the 1st gear bush from the output shaft.


Hide 33321N 20.REMOVE FRONT OUTPUT SHAFT BEARING

a.
C199114
1.302,2.646 1.99,2.646 1.99,2.646 1.99,2.802 false 2.688,1.188 2.177,1.188 false 2.656,1.292 2.49,1.292 false 2.625,1.406 2.49,1.406 2.49,1.406 2.49,1.198 false 0.302,1.646 0.302,0.792 0.302,0.792 0.458,0.792 false 1.854,2.844 2.323,3.125 0.469,0.281 10 false SST 1.854,1.115 2.333,1.448 0.479,0.333 10 false SST 0.521,0.708 0.99,0.958 0.469,0.25 10 false SST

Using SST and a press, remove the front output shaft bearing from the output shaft.

SST
09950-00020  
09950-00030  
09950-40011  (09957-04010)
09950-60010  (09951-00180, 09951-00340, 09952-06010)