Home › Drivetrain › EB62 MANUAL TRANSMISSION / TRANSAXLE › OUTPUT SHAFT › 2011.10–2013.07
RM19V0EQ _52 Drivetrain _014584 EB62 MANUAL TRANSMISSION / TRANSAXLE _0074004 OUTPUT SHAFT A

EB62 MANUAL TRANSMISSION / TRANSAXLE  OUTPUT SHAFT  REASSEMBLY  


PROCEDURE

Hide 33321N 1.INSTALL FRONT OUTPUT SHAFT BEARING

a.
C200176
1.885,2.573 2.323,2.573 2.323,2.573 2.323,2.729 false 2.313,0.823 2.438,0.823 false 2.01,0.75 2.438,1.063 0.427,0.313 10 false SST 2.188,2.771 2.552,3.01 0.365,0.24 10 false SST

Using SST and a press, press in a new front output shaft bearing to the output shaft.

SST
09527-21011  
09608-06041  


Hide 33345 2.INSTALL 1ST GEAR BUSH

a.
C200177

Coat the 1st gear bush with gear oil and install it to the output shaft.


Hide 33335C 3.INSTALL 1ST GEAR NEEDLE ROLLER BEARING

a.
C200178

Coat the 1st gear needle roller bearing with gear oil and install it to the output shaft.


Hide 33335 4.INSTALL 1ST GEAR

a.
C200179

Coat the 1st gear with gear oil and install it to the output shaft.

NOTICE:

Install the 1st gear as shown in the illustration.



Hide 33037B 5.INSTALL NO. 1 SYNCHRONIZER RING SET (for 1st Gear)

a.

Coat the 1st gear cone and No. 1 synchronizer ring set (for 1st Gear) with gear oil.


b.
C200180

Install the inner ring to the 1st gear.


c.

Install the middle ring to the 1st gear.

NOTICE:

Attach the claws of the middle ring to the grooves of the 1st gear.



d.

Install the outer ring to the 1st gear.

NOTICE:

Align the claws of the inner ring with the grooves of the outer ring before installing the outer ring.



Hide 33361 6.INSTALL NO. 1 TRANSMISSION CLUTCH HUB

a.
C200181

Install the No. 1 transmission clutch hub to the output shaft.

NOTICE:

Align the cutout of the No. 1 transmission clutch hub with the protrusion of the outer ring as shown in the illustration.



Hide 33365 7.INSTALL NO. 1 SYNCHROMESH SHIFTING KEY

a.
C200182

Install the 3 No. 1 synchromesh shifting keys to the No. 1 transmission clutch hub.


Hide 33331 8.INSTALL REVERSE GEAR

a.

Coat the reverse gear and No. 1 transmission clutch hub with gear oil.


b.
C200183

Install the reverse gear to the No. 1 transmission clutch hub assembly.

NOTICE:

Install the reverse gear as shown in the illustration.



Hide 33037B 9.INSTALL NO. 1 SYNCHRONIZER RING SET (for 2nd Gear)

a.

Coat the 2nd gear cone and No. 1 synchronizer ring set (for 2nd Gear) with gear oil.


b.
C200184

Install the outer ring to the No. 1 transmission clutch hub.

NOTICE:

Align the protrusion of the outer ring with the cutout of the No. 1 transmission clutch hub before installing the outer ring.



c.
C200185

Install the middle ring to the outer ring.


d.
C200186
2.073,2.771 2.073,2.521 2.073,2.521 1.083,2.521 false 0.458,0.938 0.594,0.938 0.594,0.938 0.594,1.24 false 1.938,0.313 2.844,0.313 2.844,0.313 2.844,0.656 false 2.458,1.469 2.458,0.313 false 2.063,0.646 2.063,0.313 false 1.74,0.25 2,0.479 0.26,0.229 10 false *1 0.24,0.865 0.531,1.156 0.292,0.292 10 false *2 2,2.823 2.365,3.115 0.365,0.292 10 false *3
*1 Cutout
*2 Inner Ring
*3 Outer Ring


Install the inner ring to the middle ring.

NOTICE:

Align the cutouts of the outer ring with the protrusions of the inner ring before installing the inner ring.



Hide 33356A 10.INSTALL INNER 2ND GEAR BEARING RACE

a.
C200187

Coat the inner 2nd gear bearing race with gear oil and install it to the output shaft.


Hide 33332B 11.INSTALL 2ND GEAR NEEDLE ROLLER BEARING

a.
C200188

Coat the 2nd gear needle roller bearing with gear oil and install it to the output shaft.


Hide 33332 12.INSTALL 2ND GEAR

a.
C200189
0.396,1.24 0.625,1.24 false 0.823,0.292 0.552,0.292 false 0.552,0.292 0.552,0.552 false 0.865,0.229 1.115,0.458 0.25,0.229 10 true *1 0.198,1.167 0.469,1.438 0.271,0.271 10 false *2
*1 Groove
*2 Claw


Coat the 2nd gear with gear oil and install it to the output shaft.

NOTICE:

Align the claw of the middle ring with the groove of the 2nd gear before installing the 2nd gear.



Hide 33423A 13.INSTALL 3RD DRIVEN GEAR

a.
C200190
2.635,0.375 2.042,0.375 false 2.635,0.281 2.323,0.281 2.323,0.281 2.323,0.521 false 2.333,0.521 2.573,0.521 false 2.469,1.948 2.094,1.948 false 1.74,0.313 2.188,0.625 0.448,0.313 10 false SST 1.771,1.875 2.208,2.115 0.438,0.24 10 false SST

Using SST and a press, press in the 3rd driven gear to the output shaft.

SST
09316-20011  
09950-60010  (09951-00180, 09951-00340, 09952-06010)
09950-40011  (09957-04010)


Hide 33431C 14.INSTALL OUTPUT GEAR SPACER

a.
C200191

Install the output gear spacer onto the output shaft.


Hide 33422B 15.INSTALL 4TH DRIVEN GEAR

a.
C200192
2.26,1.208 2.531,1.208 false 1.958,1.135 2.344,1.427 0.385,0.292 10 false SST

Using SST and a press, press in the 4th driven gear to the output shaft.

SST
09316-60011  (09316-00011)


Hide 33428C 16.INSTALL 5TH DRIVEN GEAR

a.
C200193
2.281,1.313 2.521,1.313 false 1.958,1.229 2.385,1.51 0.427,0.281 10 false SST

Using SST and a press, press in the 5th driven gear to the output shaft.

SST
09316-60011  (09316-00011)


Hide 33431C 17.INSTALL OUTPUT GEAR SPACER

a.
C200194

Install the output gear spacer to the output shaft.


Hide 33429B 18.INSTALL 6TH DRIVEN GEAR

a.
C200195
2.385,1.198 2.625,1.198 false 2.063,1.115 2.51,1.469 0.448,0.354 10 false SST

Using SST and a press, press in the 6th driven gear to the output shaft.

SST
09316-60011  (09316-00011)


Hide 33321A 19.INSTALL REAR OUTPUT SHAFT BEARING

a.
C200196
2.729,1.115 2.365,1.115 false 2.063,1.031 2.458,1.354 0.396,0.323 10 false SST

Using SST and a press, press in a new rear output shaft bearing to the output shaft.

SST
09608-04031  


Hide 20.INSPECT 2ND GEAR RADIAL CLEARANCE

Hide 21.INSPECT 1ST GEAR RADIAL CLEARANCE

Hide 22.INSPECT 2ND GEAR THRUST CLEARANCE

Hide 23.INSPECT 1ST GEAR THRUST CLEARANCE