Home › Brake › PARKING BRAKE › PARKING BRAKE PEDAL(for LHD) › 2011.10–2016.05
RM19V0EQ _54 Brake _014595 PARKING BRAKE _0074053 PARKING BRAKE PEDAL(for LHD) A

PARKING BRAKE  PARKING BRAKE PEDAL(for LHD)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

CAUTION:

Be sure to read Precaution thoroughly before servicing.

w/ VSC: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(w/ VSC)>PRECAUTION

w/o VSC: Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM(w/o VSC)>PRECAUTION


NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 58543B 4.REMOVE FLOOR CARPET BRACKET RH

Hide 46441 6.LOOSEN ADJUSTING NUT

a.
C237832C01
2.302,1.542 2.302,0.927 2.302,0.927 2.573,0.927 true 2.896,1.542 2.896,0.865 2.896,0.865 2.729,0.865 true 2.25,1.563 2.573,1.823 0.323,0.26 10 false *1 2.854,1.552 3.146,1.823 0.292,0.271 10 false *2
*1 Lock Nut
*2 Adjusting Nut


Remove the lock nut and loosen the adjusting nut.


Hide 46440 7.SEPARATE NO. 4 PARKING BRAKE CABLE ASSEMBLY

a.
C274274C01
1.177,0.51 1.49,0.76 0.313,0.25 10 false *a 2.094,0.927 2.417,1.219 0.323,0.292 10 false *b
*a Turn
*b Hold


Separate the No. 4 parking brake cable assembly from the parking brake control pedal assembly as shown in the illustration.


Hide 46201 8.REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

a.

Turn back the floor carpet.


b.
C237834

Remove the clip from the No. 1 parking brake cable assembly.


c.

Remove the bolt and 2 nuts, and separate the No. 1 parking brake cable assembly.


d.
C237835

Disconnect the parking brake switch connector.


e.
C237836

Remove the bolt, 2 nuts and parking brake control pedal assembly.