Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for HDD) › 2011.10–2015.04
RM19V0EQ _56 Audio / Visual / Telematics _014600 NAVIGATION / MULTI INFO DISPLAY _0074086 NAVIGATION SYSTEM(for HDD) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for HDD)  Speaker Circuit  


DESCRIPTION

for 6 Speakers:

If there is a short in a speaker circuit, the navigation ECU sub-assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is no malfunction in the navigation ECU sub-assembly or speakers.

If a short is detected in a speaker circuit, no sound can be heard from the speakers.


for 10 Speakers:

If there is a short in a speaker circuit, the stereo component amplifier assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is no malfunction in the stereo component amplifier assembly or speakers.

If a short is detected in a speaker circuit, no sound can be heard from the speakers.


WIRING DIAGRAM

for 6 Speakers


E226481E29
5.792,7.427 6.771,7.781 0.979,0.354 10 false Navigation ECU Sub-assembly 3.021,1.188 4.302,1.844 1.281,0.656 10 false Front No. 2 Speaker Assembly RH 5.552,0.76 5.823,1.031 0.271,0.271 10 false 1 4.531,0.813 4.635,0.969 0.104,0.156 10 false 4 4.531,1.677 4.635,1.833 0.104,0.156 10 false 2 2.333,0.813 2.438,0.969 0.104,0.156 10 false 3 2.333,1.677 2.438,1.833 0.104,0.156 10 false 1 2.469,0.813 2.573,0.969 0.104,0.156 10 false + 2.469,1.677 2.573,1.833 0.104,0.156 10 false - 4.063,1.667 4.5,1.823 0.438,0.156 10 false TWR- 4.063,2.792 4.5,2.948 0.438,0.156 10 false TWL+ 4.063,3.656 4.5,3.813 0.438,0.156 10 false TWL- 4.063,0.813 4.5,0.969 0.438,0.156 10 false TWR+ 5.51,0.948 5.802,1.135 0.292,0.188 10 false I64 5.51,1.823 5.833,2.063 0.323,0.24 10 false I64 3.021,1.052 3.302,1.24 0.281,0.188 10 false I83 0.344,1.188 1.625,1.844 1.281,0.656 10 false Front No. 1 Speaker Assembly RH 0.344,1.042 0.604,1.198 0.26,0.156 10 false J5 3.021,3.167 4.313,3.594 1.292,0.427 10 false Front No. 2 Speaker Assembly LH 4.531,2.792 4.635,2.948 0.104,0.156 10 false 4 4.531,3.656 4.635,3.813 0.104,0.156 10 false 2 2.333,2.792 2.438,2.948 0.104,0.156 10 false 3 2.333,3.656 2.438,3.813 0.104,0.156 10 false 1 2.469,2.792 2.573,2.948 0.104,0.156 10 false + 2.469,3.656 2.573,3.813 0.104,0.156 10 false - 3.021,3.031 3.281,3.188 0.26,0.156 10 false I1 0.344,3.167 1.625,3.823 1.281,0.656 10 false Front No. 1 Speaker Assembly LH 0.344,3.031 0.604,3.188 0.26,0.156 10 false K5 0.74,4.979 1.646,5.635 0.906,0.656 10 false Rear Speaker Assembly RH 0.74,4.823 1.052,4.979 0.313,0.156 10 false O18 0.74,6.5 1.646,7.156 0.906,0.656 10 false Rear Speaker Assembly LH 0.74,6.344 1.031,6.5 0.292,0.156 10 false O21 5.844,0.958 6.281,1.229 0.438,0.271 10 false FR+ 5.844,1.833 6.229,2.115 0.385,0.281 10 false FR- 5.844,2.938 6.208,3.177 0.365,0.24 10 false FL+ 5.844,3.802 6.167,3.99 0.323,0.188 10 false FL- 5.844,4.854 6.188,5.052 0.344,0.198 10 false RR+ 5.833,5.49 6.271,5.781 0.438,0.292 10 false RR- 5.844,6.375 6.292,6.677 0.448,0.302 10 false RL+ 5.844,7.01 6.281,7.281 0.438,0.271 10 false RL- 5.552,6.802 5.75,7.052 0.198,0.25 10 false 6 5.552,6.167 5.76,6.427 0.208,0.26 10 false 2 5.552,5.292 5.813,5.542 0.26,0.25 10 false 3 5.552,4.656 5.74,4.896 0.188,0.24 10 false 1 5.542,3.594 5.719,3.823 0.177,0.229 10 false 6 5.552,2.74 5.75,2.958 0.198,0.219 10 false 2 5.552,1.635 5.708,1.875 0.156,0.24 10 false 5 1.792,1.01 1.896,1.167 0.104,0.156 10 false 1 1.792,1.656 1.896,1.813 0.104,0.156 10 false 2 1.792,2.99 1.896,3.146 0.104,0.156 10 false 1 1.792,3.635 1.896,3.792 0.104,0.156 10 false 2 1.792,4.792 1.896,4.948 0.104,0.156 10 false 1 1.792,5.438 1.896,5.594 0.104,0.156 10 false 2 1.792,6.313 1.896,6.469 0.104,0.156 10 false 1 1.792,6.958 1.896,7.115 0.104,0.156 10 false 2 5.51,2.917 5.802,3.104 0.292,0.188 10 false I64 5.5,3.792 5.813,3.99 0.313,0.198 10 false I64 5.51,4.844 5.802,5.031 0.292,0.188 10 false I65 5.51,5.479 5.865,5.75 0.354,0.271 10 false I65 5.51,6.99 5.938,7.292 0.427,0.302 10 false I65 5.51,6.354 5.875,6.583 0.365,0.229 10 false I65


for 10 Speakers


E226522E13
5.698,0.625 5.885,0.781 0.188,0.156 10 false 15 5.969,0.74 6.344,1.031 0.375,0.292 10 false FR+ 5.969,1.396 6.396,1.75 0.427,0.354 10 false FR- 5.979,1.844 6.406,2.188 0.427,0.344 10 false FL+ 5.969,2.49 6.302,2.802 0.333,0.313 10 false FL- 5.979,3.104 6.531,3.438 0.552,0.333 10 false TWR+ 5.979,3.74 6.51,4.125 0.531,0.385 10 false TWR- 5.979,4.365 6.521,4.688 0.542,0.323 10 false TWL+ 5.969,5 6.49,5.302 0.521,0.302 10 false TWL- 5.708,4.865 6.104,5.167 0.396,0.302 10 false 29 5.802,5.542 6.24,5.813 0.438,0.271 10 false I68 5.708,4.229 5.885,4.385 0.177,0.156 10 false 14 5.708,3.583 6,3.833 0.292,0.25 10 false 27 5.698,2.958 5.885,3.135 0.188,0.177 10 false 12 5.708,2.365 5.885,2.521 0.177,0.156 10 false 26 5.708,1.729 5.896,1.885 0.188,0.156 10 false 11 5.698,1.25 5.875,1.406 0.177,0.156 10 false 30 5.781,5.719 7,6.375 1.219,0.656 10 false Stereo Component Amplifier Assembly 1.917,0.688 2.177,0.979 0.26,0.292 10 false 1 1.917,1.375 2.167,1.656 0.25,0.281 10 false 2 1.917,1.813 2.125,2.104 0.208,0.292 10 false 1 1.917,2.51 2.115,2.75 0.198,0.24 10 false 2 2.938,2.958 3.177,3.219 0.24,0.26 10 false 4 2.938,3.583 3.208,3.885 0.271,0.302 10 false 3 2.948,4.219 3.052,4.375 0.104,0.156 10 false 4 2.948,4.854 3.115,5.063 0.167,0.208 10 false 3 0.573,0.969 1.833,1.354 1.26,0.385 10 false Front No. 1 Speaker Assembly RH 0.573,0.802 0.854,0.958 0.281,0.156 10 false J5 0.542,2.135 1.823,2.792 1.281,0.656 10 false Front No. 1 Speaker Assembly LH 0.552,1.948 0.875,2.115 0.323,0.167 10 false K5 0.375,3.323 1.656,3.802 1.281,0.479 10 false Front No. 2 Speaker Assembly RH 0.375,3.135 0.635,3.292 0.26,0.156 10 false I84 0.365,4.552 1.656,5 1.292,0.448 10 false Front No. 2 Speaker Assembly LH 0.354,4.354 0.615,4.51 0.26,0.156 10 false I2

E226483E20
5.99,0.76 6.385,0.917 0.396,0.156 10 false CTR+ 5.979,1.385 6.354,1.542 0.375,0.156 10 false CTR- 5.698,1.25 5.875,1.406 0.177,0.156 10 false 28 5.698,0.615 5.885,0.771 0.188,0.156 10 false 13 1.917,0.698 2.021,0.854 0.104,0.156 10 false 2 1.896,1.417 2,1.573 0.104,0.156 10 false 1 0.563,0.969 1.833,1.385 1.271,0.417 10 false Front No. 3 Speaker Assembly 0.552,0.792 0.813,0.948 0.26,0.156 10 false I60 5.969,1.854 6.271,2.01 0.302,0.156 10 false SR+ 5.969,2.49 6.229,2.646 0.26,0.156 10 false SR- 5.698,2.365 6.083,2.74 0.385,0.375 10 false 25 5.698,1.75 6,2 0.302,0.25 10 false 10 1.917,1.813 2.021,1.969 0.104,0.156 10 false 2 1.917,2.5 2.021,2.656 0.104,0.156 10 false 1 0.542,2.167 1.854,2.521 1.313,0.354 10 false Rear No. 2 Speaker Assembly RH 0.531,1.99 0.875,2.146 0.344,0.156 10 false O19 5.969,2.948 6.448,3.365 0.479,0.417 10 false SL+ 5.969,3.583 6.365,3.906 0.396,0.323 10 false SL- 5.698,3.469 5.875,3.625 0.177,0.156 10 false 24 5.75,2.833 5.938,2.99 0.188,0.156 10 false 9 1.917,2.917 2.021,3.073 0.104,0.156 10 false 2 1.917,3.583 2.021,3.74 0.104,0.156 10 false 1 0.552,3.271 1.865,3.646 1.313,0.375 10 false Rear No. 2 Speaker Assembly LH 0.542,3.083 0.875,3.24 0.333,0.156 10 false O20 5.958,4.073 6.615,4.406 0.656,0.333 10 false WF1+ 5.969,4.698 6.417,4.948 0.448,0.25 10 false WF1- 5.698,4.573 5.958,4.844 0.26,0.271 10 false 23 5.74,3.948 5.927,4.104 0.188,0.156 10 false 8 1.917,4.073 2.021,4.229 0.104,0.156 10 false 1 1.917,4.75 2.083,5 0.167,0.25 10 false 2 0.333,4.385 1.844,4.594 1.51,0.208 10 false Rear Speaker Assembly 0.323,4.208 0.604,4.365 0.281,0.156 10 false O22 5.781,5.083 6.135,5.385 0.354,0.302 10 false I68 5.781,5.26 7,5.917 1.219,0.656 10 false Stereo Component Amplifier Assembly


PROCEDURE

1.CONFIRM MODEL
a.

Choose the model to be inspected.

Result:
Model Proceed to
for 6 Speakers A
for 10 Speakers B




A

2.CHECK HARNESS AND CONNECTOR

B

7.CHECK HARNESS AND CONNECTOR
2.CHECK HARNESS AND CONNECTOR
a.

Disconnect the connectors from the navigation ECU sub-assembly and speakers.


b.

Measure the resistance between each of the front No. 2 speaker assemblies and the navigation ECU sub-assembly to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
I64-1 (FR+) - I83-4 (TWR+) Always Below 1 Ω
I64-5 (FR-) - I83-2 (TWR-) Always Below 1 Ω
I64-2 (FL+) - I1-4 (TWL+) Always Below 1 Ω
I64-6 (FL-) - I1-2 (TWL-) Always Below 1 Ω



c.

Measure the resistance between each of the front No. 1 speaker assemblies and the front No. 2 speaker assemblies to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
I83-3 (+) - J5-1 Always Below 1 Ω
I83-1 (-) - J5-2 Always Below 1 Ω
I1-3 (+) - K5-1 Always Below 1 Ω
I1-1 (-) - K5-2 Always Below 1 Ω



d.

Measure the resistance between each of the rear speaker assemblies and the navigation ECU sub-assembly to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
I65-1 (RR+) - O18-1 Always Below 1 Ω
I65-3 (RR-) - O18-2 Always Below 1 Ω
I65-2 (RL+) - O21-1 Always Below 1 Ω
I65-6 (RL-) - O21-2 Always Below 1 Ω



e.

Measure the resistance between the navigation ECU sub-assembly and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
I64-1 (FR+) - Body ground Always 10 kΩ or higher
I64-5 (FR-) - Body ground Always 10 kΩ or higher
I64-2 (FL+) - Body ground Always 10 kΩ or higher
I64-6 (FL-) - Body ground Always 10 kΩ or higher
I65-1 (RR+) - Body ground Always 10 kΩ or higher
I65-3 (RR-) - Body ground Always 10 kΩ or higher
I65-2 (RL+) - Body ground Always 10 kΩ or higher
I65-6 (RL-) - Body ground Always 10 kΩ or higher



f.

Measure the resistance between each of the front No. 2 speaker assemblies and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
I83-3 (+) - Body ground Always 10 kΩ or higher
I83-1 (-) - Body ground Always 10 kΩ or higher
I1-3 (+) - Body ground Always 10 kΩ or higher
I1-1 (-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.
E219303C59
0.51,1.906 1.042,2.198 0.531,0.292 0.51,1.531 1.042,1.823 0.531,0.292 0.677,1.958 0.969,2.125 0.292,0.167 10 false K5 1.104,1.958 1.323,2.125 0.219,0.167 10 false *B 0.698,1.594 0.99,1.76 0.292,0.167 10 false J5 1.083,1.594 1.635,2.01 0.552,0.417 10 false *A 0.167,0.146 0.833,0.781 0.667,0.635 10 false *a
*A for RH
*B for LH
*a Component without harness connected
(Front No. 1 Speaker Assembly)


Resistance check

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
J5-1 - J5-2 Always 3.2 to 4.8 Ω
K5-1 - K5-2 Always 3.2 to 4.8 Ω




Result:
Proceed to
OK
NG



OK

4.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

4.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
a.
E226097C26
0.094,0.079 0.249,0.227 0.155,0.148 10 *a 1.959,0.724 2.204,0.899 0.245,0.175 10 *A 1.959,1.059 2.204,1.234 0.245,0.175 10 *B 1.464,0.66 1.927,0.946 0.463,0.286 1.578,0.722 1.828,0.885 0.25,0.163 10 I83 1.455,1.004 1.918,1.29 0.463,0.286 1.623,1.066 1.77,1.229 0.146,0.163 10 I1 1.498,2.239 1.652,2.387 0.155,0.148 10 + 0.656,2.514 1.302,2.662 0.647,0.148 10 TWR+*A 0.656,2.686 1.263,2.834 0.607,0.148 10 TWL+*B 1.842,2.514 2.488,2.662 0.647,0.148 10 TWR-*A 1.842,2.686 2.449,2.834 0.607,0.148 10 TWL-*B 2.42,2.205 2.533,2.352 0.113,0.148 10 - 1.331,1.8 1.081,2.471 false 1.675,1.817 1.56,2.228 false 2.299,1.817 2.414,2.228 false 1.99,1.8 2.168,2.467 false
*A for RH
*B for LH
*a Component without harness connected
(Front No. 2 Speaker Assembly)


Resistance check

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I83-2 (TWR-) - I83-4 (TWR+) Always 10 kΩ or higher
I83-1 (-) - I83-2 (TWR-) Always Below 1 Ω
I83-3 (+) - I83-4 (TWR+) Always Below 1 Ω
I1-2 (TWL-) - I1-4 (TWL+) Always 10 kΩ or higher
I1-1 (-) - I1-2 (TWL-) Always Below 1 Ω
I1-3 (+) - I1-4 (TWL+) Always Below 1 Ω




Result:
Proceed to
OK
NG



OK

5.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

NG

5.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY
a.

Check that the malfunction disappears when a known good speaker is installed.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL

OK:

Malfunction disappears.


HINT:
·

Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.

·

When there is a possibility that either the right or left front speaker is defective, inspect by interchanging the right one with the left one.

·

Perform the above inspection on both LH and RH sides.




Result:
Proceed to
OK
NG



OK

END (FRONT NO. 2 SPEAKER ASSEMBLY WAS DEFECTIVE)

NG

6.INSPECT REAR SPEAKER ASSEMBLY
6.INSPECT REAR SPEAKER ASSEMBLY
a.
E219303C60
0.469,1.917 1,2.208 0.531,0.292 0.469,1.542 1,1.833 0.531,0.292 0.625,1.969 1.042,2.208 0.417,0.24 10 false O21 0.615,1.604 1.031,1.885 0.417,0.281 10 false O18 0.24,0.167 0.688,0.5 0.448,0.333 10 false *a 1.073,1.594 1.375,1.927 0.302,0.333 10 false *A 1.073,1.979 1.344,2.26 0.271,0.281 10 false *B
*A for RH
*B for LH
*a Component without harness connected
(Rear Speaker Assembly)


Resistance check

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O18-1 - O18-2 Always 3.2 to 4.8 Ω
O21-1 - O21-2 Always 3.2 to 4.8 Ω




Result:
Proceed to
OK
NG



OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

7.CHECK HARNESS AND CONNECTOR
a.

Disconnect the connectors from the stereo component amplifier assembly and speakers.


b.

Measure the resistance between each of the front No. 1 speaker assemblies and the stereo component amplifier assembly to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
I68-15 (FR+) - J5-1 Always Below 1 Ω
I68-30 (FR-) - J5-2 Always Below 1 Ω
I68-11 (FL+) - K5-1 Always Below 1 Ω
I68-26 (FL-) - K5-2 Always Below 1 Ω



c.

Measure the resistance between each of the front No. 2 speaker assemblies and the stereo component amplifier assembly to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
I68-12 (TWR+) - I84-4 Always Below 1 Ω
I68-27 (TWR-) - I84-3 Always Below 1 Ω
I68-14 (TWL+) - I2-4 Always Below 1 Ω
I68-29 (TWL-) - I2-3 Always Below 1 Ω



d.

Measure the resistance between the front No. 3 speaker assembly and the stereo component amplifier assembly to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
I68-13 (CTR+) - I60-2 Always Below 1 Ω
I68-28 (CTR-) - I60-1 Always Below 1 Ω



e.

Measure the resistance between each of the rear No. 2 speaker assemblies and the stereo component amplifier assembly to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
I68-10 (SR+) - O19-2 Always Below 1 Ω
I68-25 (SR-) - O19-1 Always Below 1 Ω
I68-9 (SL+) - O20-2 Always Below 1 Ω
I68-24 (SL-) - O20-1 Always Below 1 Ω



f.

Measure the resistance between the rear speaker assembly and the stereo component amplifier assembly to check for an open circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
I68-8 (WF1+) - O22-1 Always Below 1 Ω
I68-23 (WF1-) - O22-2 Always Below 1 Ω



g.

Measure the resistance between the stereo component amplifier assembly and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
I68-15 (FR+) - Body ground Always 10 kΩ or higher
I68-30 (FR-) - Body ground Always 10 kΩ or higher
I68-11 (FL+) - Body ground Always 10 kΩ or higher
I68-26 (FL-) - Body ground Always 10 kΩ or higher
I68-12 (TWR+) - Body ground Always 10 kΩ or higher
I68-27 (TWR-) - Body ground Always 10 kΩ or higher
I68-14 (TWL+) - Body ground Always 10 kΩ or higher
I68-29 (TWL-) - Body ground Always 10 kΩ or higher
I68-13 (CTR+) - Body ground Always 10 kΩ or higher
I68-28 (CTR-) - Body ground Always 10 kΩ or higher
I68-10 (SR+) - Body ground Always 10 kΩ or higher
I68-25 (SR-) - Body ground Always 10 kΩ or higher
I68-9 (SL+) - Body ground Always 10 kΩ or higher
I68-24 (SL-) - Body ground Always 10 kΩ or higher
I68-8 (WF1+) - Body ground Always 10 kΩ or higher
I68-23 (WF1-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

8.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

8.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.
E219303C61
0.515,1.907 1.051,2.2 0.536,0.292 0.679,1.962 0.971,2.127 0.292,0.165 10 K5 1.102,1.962 1.325,2.127 0.223,0.165 10 *B 0.515,1.534 1.051,1.827 0.536,0.292 0.693,1.589 0.986,1.754 0.292,0.165 10 J5 1.088,1.589 1.311,1.754 0.223,0.165 10 *A 0.095,0.0040 0.271,0.17 0.176,0.165 10 *a
*A for RH
*B for LH
*a Component without harness connected
(Front No. 1 Speaker Assembly)


Resistance check

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
J5-1 - J5-2 Always 4.6 to 6.6 Ω
K5-1 - K5-2 Always 4.6 to 6.6 Ω




Result:
Proceed to
OK
NG



OK

9.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

9.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
a.
E219304C21
0.125,1.469 0.573,1.75 0.448,0.281 0.125,1.875 0.573,2.156 0.448,0.281 0.271,1.521 0.51,1.688 0.24,0.167 10 false I84 0.688,1.521 1.021,1.813 0.333,0.292 10 false *A 0.25,0.167 0.604,0.458 0.354,0.292 10 false *a 0.313,1.927 0.5,2.125 0.188,0.198 10 false I2 0.698,1.927 1.094,2.219 0.396,0.292 10 false *B
*A for RH
*B for LH
*a Component without harness connected
(Front No. 2 Speaker Assembly)


Resistance check

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I84-4 - I84-3 Always 3.4 to 5.2 Ω
I2-4 - I2-3 Always 3.4 to 5.2 Ω




Result:
Proceed to
OK
NG



OK

10.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY

NG

10.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY
a.
E222247C26
0.563,1.385 0.938,1.646 0.375,0.26 0.229,0.188 0.719,0.625 0.49,0.438 10 false *a 0.677,1.438 1.01,1.729 0.333,0.292 10 false I60
*a Component without harness connected
(Front No. 3 Speaker Assembly)


Resistance check

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I60-1 - I60-2 Always 6.8 to 10.2 Ω




Result:
Proceed to
OK
NG



OK

11.INSPECT REAR NO. 2 SPEAKER ASSEMBLY

NG

11.INSPECT REAR NO. 2 SPEAKER ASSEMBLY
a.
E222247C27
0.375,1.385 0.813,1.677 0.438,0.292 0.375,1.74 0.823,2.021 0.448,0.281 0.24,0.156 0.635,0.5 0.396,0.344 10 false *a 0.479,1.458 0.927,1.76 0.448,0.302 10 false O19 0.969,1.458 1.167,1.635 0.198,0.177 10 false *A 0.469,1.802 0.958,2.229 0.49,0.427 10 false O20 0.969,1.813 1.188,1.99 0.219,0.177 10 false *B
*A for RH
*B for LH
*a Component without harness connected
(Rear No. 2 Speaker Assembly)


Resistance check

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O19-1 - O19-2 Always 6.8 to 10.2 Ω
O20-1 - O20-2 Always 6.8 to 10.2 Ω




Result:
Proceed to
OK
NG



OK

12.INSPECT REAR SPEAKER ASSEMBLY

NG

12.INSPECT REAR SPEAKER ASSEMBLY
a.
E219303C62
0.698,1.708 1.146,1.99 0.448,0.281 0.802,1.76 1.427,2.25 0.625,0.49 10 false O22 0.177,0.156 1.073,0.833 0.896,0.677 10 false *a
*a Component without harness connected
(Rear Speaker Assembly)


Resistance check

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
O22-1 - O22-2 Always 4.8 to 6.8 Ω




Result:
Proceed to
OK
NG



OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG