Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › ULTRASONIC SENSOR(for Rear Side) › 2011.10–2015.04
RM19V0EQ _56 Audio / Visual / Telematics _014601 PARK ASSIST / MONITORING _0074088 ULTRASONIC SENSOR(for Rear Side) A

PARK ASSIST / MONITORING  ULTRASONIC SENSOR(for Rear Side)  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR BUMPER ASSEMBLY

Hide 89348J 2.REMOVE ULTRASONIC SENSOR CLIP

a.
E265614C10
0.146,0.219 0.708,0.5 0.563,0.281 12 *A 0.198,2.344 0.74,2.708 0.542,0.365 12 *B
*A LH Side
*B RH Side


Disconnect the connector.


b.

Disengage the clamp.


c.
E228018C03
0.083,2.313 0.365,2.542 0.281,0.229 12 *B 0.083,0.063 0.365,0.292 0.281,0.229 12 *A
*A LH Side
*B RH Side


Disengage the 4 claws to remove the ultrasonic sensor clip.


Hide 89341A 3.REMOVE NO. 1 ULTRASONIC SENSOR

a.
E228019C05
0.063,2.448 0.344,2.677 0.281,0.229 12 *B 0.063,0.052 0.375,0.302 0.313,0.25 12 *A
*A LH Side
*B RH Side


Disengage the 2 claws to remove the No. 1 ultrasonic sensor.


Hide 89348 4.REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

a.
E228020C03
0.063,2.448 0.354,2.708 0.292,0.26 12 *B 0.063,0.073 0.344,0.313 0.281,0.24 12 *A
*A LH Side
*B RH Side


Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the rear bumper assembly.