Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SENSOR › 2011.10–2015.04
RM19V0EQ _56 Audio / Visual / Telematics _014601 PARK ASSIST / MONITORING _0074089 BLIND SPOT MONITOR SENSOR A

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR BUMPER ASSEMBLY

Hide 88172 2.REMOVE BLIND SPOT MONITOR SENSOR

a.

for LH Side:

i.
E226404

Disengage the 2 clamps.



b.

for RH Side:

i.
E226408

Disengage the clamp.



c.
E226405

Remove the 3 nuts.


d.
E226406

Disconnect the connector to remove the blind spot monitor sensor.

NOTICE:

Replace the blind spot monitor sensor if it has been dropped or subjected to a severe impact.



Hide 88173 3.REMOVE BLIND SPOT MONITOR COVER

a.
E226407

Remove the 2 nuts.


b.

Disengage the claw to remove the blind spot monitor cover.