Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT
RM19V0EQ _58 Vehicle Interior _014607 LIGHTING (INT) _0074133 VANITY LIGHT A

LIGHTING (INT)  VANITY LIGHT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 1.REMOVE ROOF HEADLINING ASSEMBLY

Hide 81340 2.REMOVE VANITY LIGHT ASSEMBLY

a.
E227552C05
1.104,0.99 0.719,0.292 0.719,0.292 1.292,0.719 false 2.604,1.531 2.906,1.688 false 0.896,1.208 0.677,1.521 false 2.063,0.26 2.5,0.323 false 0.51,0.167 0.667,0.323 0.156,0.156 10 false *2 2.938,1.625 3.094,1.781 0.156,0.156 10 false *4 0.51,1.521 0.667,1.677 0.156,0.156 10 false *3 1.875,0.167 2.031,0.323 0.156,0.156 10 false *1 1.208,0.302 1.427,0.49 0.219,0.188 10 false (1) 0.281,0.396 0.5,0.583 0.219,0.188 10 false (2)
*1 Tab
*2 Claw <A>
*3 Bulb Holder
*4 Claw <B>


Tilt the tab to disengage the 2 claws <A> and separate the bulb holder from the vanity light as shown in the illustration.


b.

Disengage the claw <B> and remove the vanity light assembly.