1.REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REMOVAL
72526A
2.REMOVE RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
71074S
3.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
71812D
4.REMOVE FRONT SEAT CUSHION SHIELD (for Manual Seat)
71862
5.REMOVE FRONT SEAT INNER CUSHION SHIELD (for Manual Seat)
6.REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REMOVAL
84921B
7.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>DISASSEMBLY
84921A
8.REMOVE RECLINING POWER SEAT SWITCH KNOB (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>DISASSEMBLY
71074S
9.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>DISASSEMBLY
71868A
10.REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>DISASSEMBLY
71812D
11.REMOVE FRONT SEAT CUSHION SHIELD (for Power Seat)
71862
12.REMOVE FRONT SEAT INNER CUSHION SHIELD (for Power Seat)
73240
13.REMOVE FRONT SEAT INNER BELT ASSEMBLY
14.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>DISASSEMBLY
15.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>DISASSEMBLY
71512S
16.REMOVE OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)
Remove the 2 hog rings.
Remove the 18 hog rings and occupant detection sensor (separate type front seat cushion pad) from the separate type front seat cushion cover.