Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR
RM19V0EQ _58 Vehicle Interior _014613 HEATING / AIR CONDITIONING _0074189 COMPRESSOR A

HEATING / AIR CONDITIONING  COMPRESSOR  REMOVAL  


PROCEDURE

Hide 1. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM

Hide 2.REMOVE RADIATOR ASSEMBLY

Hide 53736 3.REMOVE FRONT FENDER APRON SEAL RH

Hide 88711 5.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.
E227452

Remove the bolt.


b.

Disconnect the 2 connectors.


c.
E227468

Remove the bolt and disconnect the No. 1cooler refrigerant discharge hose from the compressor assembly with pulley.


d.

Remove the O-ring from the No. 1cooler refrigerant discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88704 6.DISCONNECT SUCTION HOSE SUB-ASSEMBLY

a.
E227469

Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.


b.

Remove the O-ring from the suction hose sub-assembly .

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88310 7.REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

a.
E227471

Remove the 2 bolts and 2 nuts.


b.
E227470

Using an E8 "TORX" socket, remove the 2 stud bolts and compressor assembly with pulley.

HINT:

Remove the compressor and pulley from the vehicle with the stud bolts remaining in the compressor assembly with pulley.