1. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM
2.REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
55701J
3.REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)
55701J
4.REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)
88704
5.DISCONNECT SUCTION HOSE SUB-ASSEMBLY
88710E
6.DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY
88515
7.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.
| *a | Bolt for Suction Hose Sub-assembly |
Temporarily install the bolt for the suction hose halfway to the cooler expansion valve.
Hold the bolt and pull it to remove the cooler expansion valve as shown in the illustration.
| *1 | No. 1 Cooler Evaporator Sub-assembly |
Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.