Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)
RM19V0EQ _58 Vehicle Interior _014613 HEATING / AIR CONDITIONING _0074197 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  B14B2  Lost Communication with Front Panel LIN  


DESCRIPTION

The air conditioning panel (heater control switch board) communicates with the air conditioning amplifier assembly through the LIN communication system.

If the LIN communication system malfunctions, the air conditioning amplifier assembly does not operate even if the air conditioning panel (heater control switch board) is operated.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B14B2 Lost Communication with Front Panel LIN Lost communication with the air conditioning panel (heater control switch board).
·

Harness and connector between air conditioning panel (heater control switch board) and IG circuit

·

Harness and connector between air conditioning panel (heater control switch board) and body ground

·

LIN communication system

·

Air conditioning panel (heater control switch board)

·

Air conditioning amplifier assembly


Memorized
(10 sec. or more)*1

*1: The air conditioning amplifier assembly stores the DTC of the respective malfunction if it has occurred for the period of time indicated in the brackets.


WIRING DIAGRAM

E226613
0.458,2.354 0.792,2.583 0.333,0.229 10 false I56 0.458,2.51 2.344,2.938 1.885,0.427 10 false Air Conditioning Panel (Heater Control Switch Board ) 0.927,3.188 2.552,3.354 1.625,0.167 10 false : LIN Communication Line 5.031,2.458 5.521,2.844 0.49,0.385 10 false I77 5.031,2.625 6.635,3.042 1.604,0.417 10 false Air Conditioning Amplifier Assembly 1.625,0.854 1.938,1.01 0.313,0.156 10 false LIN1 1.656,1.406 1.938,1.594 0.281,0.188 10 false IG+ 1.583,1.927 1.927,2.104 0.344,0.177 10 false GND 2.01,0.729 2.115,0.896 0.104,0.167 10 false 9 2.01,1.292 2.156,1.458 0.146,0.167 10 false 2 2.021,1.823 2.24,1.979 0.219,0.156 10 false 6 2.823,1.542 3.594,1.74 0.771,0.198 10 false A/C-IG1 3.906,1.385 4.885,1.729 0.979,0.344 10 false from IG1 NO. 1 Relay 4.99,0.719 5.188,0.875 0.198,0.156 10 false 37 5.302,0.854 5.677,1.031 0.375,0.177 10 false LIN1

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING PANEL (HEATER CONTROL SWITCH BOARD) - IG CIRCUIT)
a.

Disconnect the I56 air conditioning panel (heater control switch board) connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
I56-2 (IG+) - Body ground Ignition switch off Below 1 V
I56-2 (IG+) - Body ground Ignition switch ON 11 to 14 V



Result:
Proceed to
OK
NG



OK

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING PANEL (HEATER CONTROL SWITCH BOARD) - BODY GROUND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING PANEL (HEATER CONTROL SWITCH BOARD) - BODY GROUND)
a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I56-6 (GND) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - AIR CONDITIONING PANEL (HEATER CONTROL SWITCH BOARD))

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - AIR CONDITIONING PANEL (HEATER CONTROL SWITCH BOARD))
a.

Disconnect the I77 air conditioning amplifier assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I56-9 (LIN1) - I77-37 (LIN1) Always Below 1 Ω
I56-9 (LIN1) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

4.REPLACE AIR CONDITIONING PANEL (HEATER CONTROL SWITCH BOARD)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.REPLACE AIR CONDITIONING PANEL (HEATER CONTROL SWITCH BOARD)
a.

Replace the air conditioning panel (heater control switch board).

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING PANEL(for Automatic Air Conditioning System)>DISASSEMBLY

HINT:

Since the air conditioning panel (heater control switch board) cannot be inspected while it is removed from the vehicle, replace the air conditioning panel (heater control switch board) with a new or a known good one and check that the condition returns to normal.



OK:

Air conditioning panel (heater control switch board) operation returns to normal.


Result:
Result Proceed to
OK A
NG (When troubleshooting according to Problem Symptoms Table) B
NG (When troubleshooting according to the DTC) C



A

END (HEATER CONTROL SWITCH BOARD WAS DEFECTIVE)

B

C

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY