Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING AMPLIFIER
RM19V0EQ _58 Vehicle Interior _014613 HEATING / AIR CONDITIONING _0074195 AIR CONDITIONING AMPLIFIER A

HEATING / AIR CONDITIONING  AIR CONDITIONING AMPLIFIER  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 67913 3.REMOVE FRONT DOOR SCUFF PLATE

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL


Hide 62111A 4.REMOVE COWL SIDE TRIM SUB-ASSEMBLY

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL


Hide 55317A 6.REMOVE INSTRUMENT SIDE PANEL

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL


Hide 53921B 7.REMOVE FRONT PANEL GARNISH

HINT:

Use the same procedure for the RH side and LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL


Hide 55607 8.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 55303B 9.REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 82877 10.REMOVE ECU INTEGRATION BOX RH (for LHD)

Hide 88650N 11.REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

a.

Disconnect each connector.


b.

for LHD:

i.
E226869

Remove the 2 screws.


ii.

Disengage the 2 guides and remove the air conditioning amplifier assembly.



c.

for RHD:

i.
E228914

Remove the 2 screws.


ii.

Disengage the 2 guides and remove the air conditioning amplifier assembly.