55012A
1.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
Engage the 13 clips.
Install the No. 2 instrument panel garnish sub-assembly with the 2 screws <C> or <D>.
55844
2.INSTALL NO. 2 HEATER TO REGISTER DUCT
Install the No. 2 heater to register duct with the 2 screws <C> or <D>.
86860
3.INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)
55950G
4.INSTALL DEFROSTER NOZZLE ASSEMBLY
Engage the 2 guides.
Install the defroster nozzle assembly with the 3 screws <C> or <D>.
86101
5.INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)
86101
6.INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)
55972C
7.INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT
Engage the 2 claws.
Install the No. 2 side defroster nozzle duct with the screw <C> or <D>.
55845A
8.INSTALL NO. 3 HEATER TO REGISTER DUCT
for LHD:
Install the No. 3 heater to register duct with the 3 screws <C> or <D>.
Install the clip.
for RHD:
Install the No. 3 heater to register duct with the 3 screws <C> or <D>.
Install the clip.
55971C
9.INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT
Engage the 2 claws.
Install the No. 1 side defroster nozzle duct with the screw <C> or <D>.
55843A
10.INSTALL NO. 1 HEATER TO REGISTER DUCT
for LHD:
Install the No. 1 heater to register duct with the 3 screws <C> or <D>.
Install the clip.
for RHD:
Install the No. 1 heater to register duct with the 3 screws <C> or <D>.
Install the clip.
73960A
11.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
55328
12.INSTALL NO. 1 INSTRUMENT PANEL PIN
Install the 4 No. 1 instrument panel pins with the 4 screws <C> or <D>.