Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF HOUSING
RM19V0EQ _59 Vehicle Exterior _014617 SLIDING ROOF / CONVERTIBLE _0074217 SLIDING ROOF HOUSING A

SLIDING ROOF / CONVERTIBLE  SLIDING ROOF HOUSING  REMOVAL  


PROCEDURE

Hide 1.REMOVE ROOF HEADLINING ASSEMBLY

Hide 63218G 2.REMOVE SLIDING ROOF SIDE GARNISH LH

a.
B279108

Disengage the 2 claws and remove the sliding roof side garnish LH.


Hide 63217G 3.REMOVE SLIDING ROOF SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 63201G 4.REMOVE SLIDING ROOF GLASS SUB-ASSEMBLY

a.
B279109

Using a T25 "TORX" socket wrench, remove the 4 screws and sliding roof glass sub-assembly.

NOTICE:

To prevent the sliding roof glass and sliding roof drive gear from being displaced, fully close the sliding roof glass (sliding roof drive cable), and then remove the sliding roof glass sub-assembly.



Hide 63251 5.REMOVE SLIDING ROOF PANEL OR REMOVABLE ROOF WEATHERSTRIP

a.

Remove the sliding roof panel or removable roof weatherstrip from the sliding roof panel assembly.


Hide 62180A 6.REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Curtain Shield Airbag)

Hide 62170A 7.REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH (w/ Curtain Shield Airbag)

HINT:

Use the same procedure as for the LH side.


Hide 66425B 8.REMOVE REAR NO. 2 SIDE RAIL SPACER LH

a.
B290008

Disengage the 2 claws and remove the rear No. 2 side rail spacer LH.


Hide 66415B 9.REMOVE REAR NO. 2 SIDE RAIL SPACER RH

HINT:

Use the same procedure as for the LH side.


Hide 10.REMOVE SLIDING ROOF HOUSING ASSEMBLY

a.
B279111

for Clamp Type:

i.

Disengage the claw and disconnect the sliding roof drain hose.

HINT:

Use the same procedure for the other 3 sliding roof drain hoses.




b.
B279112

for Clip Type:

i.

Expand the clip and disconnect the sliding roof drain hose.

HINT:

Use the same procedure for the other 3 sliding roof drain hoses.




c.

Remove the 4 bolts, 8 nuts and sliding roof housing assembly.

B286381

NOTICE:

Be careful not to damage the vehicle body.