FAIL-SAFE OPERATION
If there is a problem with sensor signals or actuator systems, the skid control ECU prohibits power supply to the brake actuator assembly terminate ABS control.
ABS control will be prohibited, but EBD control will continue to the extent that EBD control is possible. If EBD control is impossible, the brake warning light will come on to warn the driver.
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>DIAGNOSIS SYSTEM
If a ABS system component malfunctions before ABS control begins, ABS control will be prohibited. If a system component malfunctions during ABS control, the system will gradually stop performing control so as not to trigger a sudden change in vehicle operation.
If it is impossible for control to continue, the warning light comes on to inform the driver of system control termination.
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ANTI-LOCK BRAKE SYSTEM>DIAGNOSIS SYSTEM
| Item | Operation |
|---|---|
| Malfunction in the ABS system. | ABS control prohibited. |
| Malfunction in the EBD system. | ABS and EBD control prohibited. |