72211
1.INSTALL SEAT TRACK ADJUSTING HANDLE
Engage the 2 springs to install the seat track adjusting handle.
71054S
2.INSTALL FRONT SEATBACK SPRING SUB-ASSEMBLY
Install the 2 front seatback hooks to the front seatback spring sub-assembly.
Engage the 2 guides to install the front seatback spring sub-assembly to the front seatback frame sub-assembly.
Engage the 4 claws.
71587B
3.INSTALL FRONT SEATBACK EDGE PROTECTOR
Engage each claw to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.
71640S
4.INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY
Engage the 4 guides to install the separate type front seatback spring assembly to the front seat frame with adjuster assembly.
Install the 4 bolts.
71538B
5.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)
Engage the 3 claws to install the front seat cushion edge protector LH.
Install the screw.
71537G
6.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)
Engage the 3 claws to install the front seat cushion edge protector RH.
Install the screw.
71538B
7.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)
Engage the 3 claws to install the front seat cushion edge protector LH.
Install the screw.
71537G
8.INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)
Engage the 3 claws to install the front seat cushion edge protector RH.
Install the screw.
71876G
9.INSTALL RECLINING ADJUSTER INSIDE COVER LH
Engage the guide to install the reclining adjuster inside cover LH.
71875F
10.INSTALL RECLINING ADJUSTER INSIDE COVER RH
Engage the guide to install the reclining adjuster inside cover RH.
71874
11.INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)
Engage the clip to install the front seat lower cushion shield LH.
Engage the hook as shown in the illustration.
Install the screw.
71873
12.INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)
Engage the clip to install the front seat lower cushion shield RH.
Engage the hook as shown in the illustration.
Install the screw.
71074S
13.INSTALL SEPARATE TYPE FRONT SEATBACK COVER
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 8 new hog rings.
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
73920A
14.INSTALL FRONT SEAT AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)
15.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Temporarily install the separate type front seatback cover with pad.
w/ Front Seat Side Airbag:
Install the 3 brackets with the 2 nuts.
For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.
Make sure that the strap is not twisted after installing the nut.
Install the bracket securely.
Engage the 4 claws to install the 2 front seat headrest supports.
Using hog ring pliers, install 3 new hog rings.
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
Close the 2 fasteners.
Using hog ring pliers, install 5 new hog rings.
Be careful not to damage the separate type front seatback cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seatback cover.
71072S
16.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings.
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Using hog ring pliers, install 2 new hog rings.
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
17.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Temporarily install the separate type front seat cushion cover with pad.
Engage each hook.
for Front Passenger Side:
Engage the clamp to connect the connector as shown in the illustration.
w/ Front Seat Side Airbag:
Engage the fastener to secure the front seat airbag assembly wire harness.
71862
18.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side)
Engage the 5 claws and 6 guides to install the front seat inner cushion shield.
71861
19.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)
Engage the 5 claws and 7 guides to install the front seat inner cushion shield.
71812D
20.INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)
Engage the 5 claws, 6 guides and clip to install the front seat cushion shield.
Install the screw.
71811D
21.INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side)
Engage the 5 claws, 7 guides and clip to install the front seat cushion shield.
Install the screw.
71074S
22.CONNECT SEPARATE TYPE FRONT SEATBACK COVER
Connect the rubber band of the separate type front seatback cover.
72493
23.INSTALL VERTICAL ADJUSTING HANDLE (for Driver Side)
Install the vertical adjusting handle with the screw.
72526A
24.INSTALL RECLINING ADJUSTER RELEASE HANDLE
Engage the claw to install the reclining adjuster release handle.
71849
25.INSTALL SEAT ADJUSTER COVER CAP
Install the 2 seat adjuster cover caps.
73240
26.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
73230
27.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)