Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SENSOR › from 2015.04
RM19V0EQ _56 Audio / Visual / Telematics _014601 PARK ASSIST / MONITORING _0074089 BLIND SPOT MONITOR SENSOR A

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Replace the blind spot monitor sensor if it has been dropped or subjected to a severe impact.


PROCEDURE

Hide 1.REMOVE REAR BUMPER ASSEMBLY

Hide 2.REMOVE BLIND SPOT MONITOR SENSOR LH WITH COVER

E287651

a.

Disconnect the connector.


b.

Remove the 3 nuts to remove the blind spot monitor sensor LH with cover.


Hide 3.REMOVE BLIND SPOT MONITOR SENSOR RH WITH COVER

E287648

a.

Disconnect the connector.


b.

Remove the 3 nuts to remove the blind spot monitor sensor RH with cover.


Hide 88173 4.REMOVE BLIND SPOT MONITOR COVER LH

E287652

a.

Disengage the 3 claws to remove the blind spot monitor cover LH.


Hide 88173 5.REMOVE BLIND SPOT MONITOR COVER RH

E287649

a.

Disengage the 3 claws to remove the blind spot monitor cover RH.


Hide 88172 6.REMOVE BLIND SPOT MONITOR SENSOR LH

Hide 88172 7.REMOVE BLIND SPOT MONITOR SENSOR RH