88172
1.INSTALL BLIND SPOT MONITOR SENSOR LH
88172
2.INSTALL BLIND SPOT MONITOR SENSOR RH
88173
3.INSTALL BLIND SPOT MONITOR COVER LH
Engage the 3 claws to install the blind spot monitor cover LH.
88173
4.INSTALL BLIND SPOT MONITOR COVER RH
Engage the 3 claws to install the blind spot monitor cover RH.
5.INSTALL BLIND SPOT MONITOR SENSOR LH WITH COVER
Install the blind spot monitor sensor LH with cover with the 3 nuts.
Connect the connector.
6.INSTALL BLIND SPOT MONITOR SENSOR RH WITH COVER
Install the blind spot monitor sensor RH with cover with the 3 nuts.
Connect the connector.
7.INSTALL REAR BUMPER ASSEMBLY
8. PERFORM BLIND SPOT MONITOR BEAM AXIS INSPECTION
9. PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>BLIND SPOT MONITOR SYSTEM>OPERATION CHECK
10. PERFORM DIAGNOSTIC SYSTEM CHECK