Home › Vehicle Exterior › LIGHTING (EXT) › FRONT TURN SIGNAL LIGHT ASSEMBLY › from 2015.04
RM19V0EQ _59 Vehicle Exterior _014621 LIGHTING (EXT) _0163944 FRONT TURN SIGNAL LIGHT ASSEMBLY A

LIGHTING (EXT)  FRONT TURN SIGNAL LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 81510H 1.INSTALL FRONT CLEARANCE LIGHT BULB

a.

Install the front clearance light bulb to the front clearance light socket.


b.
E314695

Turn the front clearance light socket with the front clearance light bulb as shown in the illustration to connect them as a unit.


Hide 81510B 2.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.

Install the front turn signal light bulb to the front turn signal light socket.


b.
E314693

Turn the front turn signal light socket with the front turn signal light bulb as shown in the illustration to connect them as a unit.


Hide 81520 3.INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY (w/o Daytime Running Light)

a.

Install the front turn signal light assembly with the 2 screws.

Torque:
1.7 N*m (17 kgf*cm, 15 in.*lbf)


Hide 81520 4.INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY (w/ Daytime Running Light)

a.

Install the front turn signal light assembly with the 2 screws.

Torque:
1.7 N*m (17 kgf*cm, 15 in.*lbf)