Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2015.04
RM19V0EQ _56 Audio / Visual / Telematics _014599 AUDIO / VIDEO _0074081 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  B158D  Video Signal Stoppage  B15A0  LAN Master Malfunction  B15B0  Display Screen Malfunction  B15B3  Radio Tuner Malfunction  B15B4  CD Changer Malfunction  B15B5  DVD Changer Malfunction  B15B7  Bluetooth Module Malfunction  


DESCRIPTION

These DTCs are stored when a malfunction occurs in the radio and display receiver assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area
B158D Video Signal Stoppage The internal video signal of the radio and display receiver assembly is interrupted Radio and display receiver assembly
B15A0 LAN Master Malfunction When either of the following condition is met:
·

Bus malfunction

·

EEPROM error


Radio and display receiver assembly
B15B0 Display Screen Malfunction Picture circuit (TFT unit) malfunction Radio and display receiver assembly
B15B3 Radio Tuner Malfunction When any of the following conditions is met:
·

AM tuner PLL is unlocked

·

FM tuner PLL is unlocked

·

Tuner malfunction


Radio and display receiver assembly
B15B4 CD Changer Malfunction When any of the following conditions is met:
·

Mechanism drive signal malfunction

·

Load/Eject malfunction

·

Read mechanism malfunction

·

Mechanical malfunction


Radio and display receiver assembly
B15B5 DVD Changer Malfunction When any of the following conditions is met:
·

Mechanism drive signal malfunction

·

Load/Eject malfunction

·

Read mechanism malfunction

·

Mechanical malfunction


Radio and display receiver assembly
B15B7 Bluetooth Module Malfunction "Bluetooth" module malfunction Radio and display receiver assembly

PROCEDURE

1.CHECK DTC
a.

Clear the DTCs.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>DTC CHECK / CLEAR

Body Electrical > Navigation System > Clear DTCs
50002 212

b.

Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes
50001 212
OK:

No DTCs are output.



Result:
Proceed to
OK
NG



OK

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY