1.REMOVE REAR CONSOLE BOX ASSEMBLY
58916
2.REMOVE BOX BOTTOM MAT
58804A
3.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
4.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
55660
5.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
6.REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY
| *1 | Protective Tape |
Apply protective tape to the area shown in the illustration.
Remove the 4 bolts.
Pull the radio receiver assembly with air conditioning control assembly toward the rear of the vehicle and disengage the 8 clips.
Disconnect each connector and remove the radio receiver assembly with air conditioning control assembly.
86211
7.REMOVE NO. 1 RADIO BRACKET
Remove the 5 screws and No. 1 radio bracket.
86212
8.REMOVE NO. 2 RADIO BRACKET
Remove the 5 screws and No. 2 radio bracket.
55900
9.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Manual Air Conditioning System)
55900
10.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
86120
11.REMOVE RADIO RECEIVER ASSEMBLY (for Radio Receiver Type)
86140A
12.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)