Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2015.04
RM19V0EQ _56 Audio / Visual / Telematics _014599 AUDIO / VIDEO _0074081 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  CD/DVD Sound Skips  


PROCEDURE

1.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.

OK:

No deformation or cracks on the disc.



Result:
Proceed to
OK
NG



OK

2.CHECK DISC

NG

DISC IS FAULTY

2.CHECK DISC
a.
I100151

Check the disc.

OK:

The disc is clean.


NOTICE:

Do not use a conventional record cleaner or anti-static preservative.


HINT:

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



Result:
Proceed to
OK
NG



OK

3.REPLACE DISC AND RECHECK

NG

CLEAN DISC

3.REPLACE DISC AND RECHECK
a.

Replace the disc with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

DISC WAS FAULTY

NG

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check the radio and display receiver assembly installation condition.

i.

Check that the radio and display receiver assembly is properly installed.

OK:

The radio and display receiver assembly is properly installed.




Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY