Home › Vehicle Exterior › HORN › HORN › from 2015.04
RM19V0EQ _59 Vehicle Exterior _014622 HORN _0074264 HORN A

HORN  HORN  INSTALLATION  


PROCEDURE

Hide 86520 1.INSTALL LOW PITCHED HORN ASSEMBLY

a.

Install the low pitched horn assembly with the bolt.

Torque:
20 N*m (199 kgf*cm, 14 ft.*lbf)


b.

Connect the connector.


Hide 86510 2.INSTALL HIGH PITCHED HORN ASSEMBLY (for 2-piece Type)

a.

Install the high pitched horn assembly with the bolt.

Torque:
20 N*m (199 kgf*cm, 14 ft.*lbf)


b.

Connect the connector.


Hide 53295E 3.INSTALL COOL AIR INTAKE DUCT SEAL