FUEL PUMP > REASSEMBLY |
| 1. INSTALL FUEL PUMP |
![]() |
Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.
| *1 | O-ring |
| *2 | Fuel Pump Spacer |
![]() |
Engage the 5 claws on the fuel filter and install the fuel pump with the suction filter.
| *1 | Fuel Filter |
| *2 | Suction Filter |
| 2. INSTALL NO. 1 FUEL SUCTION SUPPORT |
![]() |
Engage the 2 claws of the No. 1 fuel suction support.
| 3. INSTALL LOWER FUEL TANK CASE SUB-ASSEMBLY |
Connect the fuel pump harness connector to the fuel pump.
Install the spring to the fuel suction plate shaft and install it to the lower fuel tank case sub-assembly.
![]() |
Engage the 4 claws of the No. 1 fuel suction support and install the lower fuel tank case sub-assembly to the fuel suction plate with the fuel filter.
Install a new E-ring.
Connect the fuel pump harness connectors to the fuel suction plate.
| 4. INSTALL FUEL SENDER GAUGE ASSEMBLY |
![]() |
Slide the fuel sender gauge to fit the claw.
Connect the connector of the fuel sender gauge assembly.