REAR AIRBAG SENSOR > ON-VEHICLE INSPECTION |
| 1. INSPECT SIDE NO. 2 AIRBAG SENSOR ASSEMBLY (for Vehicle not Involved in Collision) |
Perform a diagnostic system check (Click here).
| 2. INSPECT SIDE NO. 2 AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed) |
Perform a diagnostic system check (Click here).
Visually check the side No. 2 airbag sensor assemblies for defects if a quarter panel of the vehicle or the area around a quarter panel is damaged.
| 3. INSPECT SIDE NO. 2 AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag is Deployed) |
When airbags have deployed as the result of a collision, be sure to replace all side No. 2 airbag sensor assemblies in the damaged areas (anywhere in need of repair).
Visually check the side No. 2 airbag sensor assemblies in undamaged areas for defects.