Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > TERMINALS OF ECU

for Preparation Click here



RADIO AND DISPLAY RECEIVER ASSEMBLY

E225865E15


Terminal No. (Symbols)
Wiring Color
Terminal Description
Condition
Specification
I152-1 (FR+) - I152-7 (GND1)
LG - BR
Sound signal (Front Right)
Audio system playing
A waveform synchronized with sounds is output
I152-2 (FL+) - I152-7 (GND1)
P - BR
Sound signal (Front Left)
Audio system playing
A waveform synchronized with sounds is output
I152-3 (ACC1) - I152-7 (GND1)
GR - BR
Power source (ACC)
Ignition switch off
Below 1 V
Ignition switch ACC
11 to 14 V
I152-4 (+B1) - I152-7 (GND1)
L-Y - BR
Power source (+B)
Always
11 to 14 V
I152-5 (FR-) - I152-7 (GND1)
L - BR
Sound signal (Front Right)
Audio system playing
A waveform synchronized with sounds is output
I152-6 (FL-) - I152-7 (GND1)
V - BR
Sound signal (Front Left)
Audio system playing
A waveform synchronized with sounds is output
I152-7 (GND1) - Body ground
BR - Body ground
Ground
Always
Below 1 V
I152-10 (ILL+) - I152-7 (GND1)
G - BR
Illumination signal
Light control switch off
Below 1 V
Light control switch in tail or head position
11 to 14 V
I153-1 (RR+) - I152-7 (GND1)
R - BR
Sound signal (Rear Right)
Audio system playing
A waveform synchronized with sounds is output
I153-2 (RL+) - I152-7 (GND1)
B - BR
Sound signal (Rear Left)
Audio system playing
A waveform synchronized with sounds is output
I153-3 (RR-) - I152-7 (GND1)
W - BR
Sound signal (Rear Right)
Audio system playing
A waveform synchronized with sounds is output
I153-6 (RL-) - I152-7 (GND1)
Y - BR
Sound signal (Rear Left)
Audio system playing
A waveform synchronized with sounds is output
I155-1 (IG) - I152-7 (GND1)
Y - BR
Power source (IG)
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
I155-2 (REV) - I152-7 (GND1)
L - BR
Reverse signal
See "Vehicle Signal Check Mode" in Operation Check (Click here)
-
I155-4 (MACC) - I152-7 (GND1)
B - BR
Microphone power supply
Ignition switch off
Below 1 V
Ignition switch ACC
4 to 6 V
I155-5 (MIN+) - I152-7 (GND1)
W - BR
Microphone voice signal
See "Microphone & Voice Recognition Check" in Operation Check (Click here)
-
I155-6 (SNS2) - I152-7 (GND1)
LG - BR
Microphone connection detection signal
Always
Below 1 V
I155-7 (TX1+)*1
GR
AVC-LAN communication signal
-
-
I155-8 (TX1-)*1
Y
AVC-LAN communication signal
-
-
I155-9 (CANH)
R
CAN communication signal
-
-
I155-10 (CANL)
W
CAN communication signal
-
-
I155-11 (AGND) - Body ground
Shield - Body ground
Shield ground
Always
Below 1 V
I155-17 (SPD) - I152-7 (GND1)
V - BR
Vehicle speed signal
See "Vehicle Signal Check Mode" in Operation Check (Click here)
-
I155-18 (SGND) - Body ground
Shield - Body ground
Shield ground
Always
Below 1 V
I155-19 (MIN-) - I152-7 (GND1)
R - BR
Microphone voice signal
See "Microphone & Voice Recognition Check" in Operation Check (Click here)
-
I155-21 (SW1) - I155-23 (SWG)
B - P
Steering pad switch signal
No switch pushed
2.97 to 3.56 V
Up switch pushed
0.27 to 0.35 V
Down switch pushed
0.86 to 1.03 V
Volume+ switch pushed
1.51 to 1.79 V
Volume- switch pushed
2.22 to 2.66 V
I155-22 (SW2) - I155-23 (SWG)
Y - P
Steering pad switch signal
No switch pushed
2.97 to 3.56 V
MODE/HOLD switch pushed
0.27 to 0.35 V
On hook switch pushed
0.86 to 1.03 V
Off hook switch pushed
1.51 to 1.79 V
I155-23 (SWG) - I152-7 (GND1)
P - BR
Steering pad switch ground
Always
Below 1 V
I155-24 (SW3) - I155-23 (SWG)
SB - P
Steering pad switch signal
No switch pushed
2.97 to 3.56 V
Enter switch pushed
0.27 to 0.35 V
Back switch pushed
0.86 to 1.03 V
Right switch pushed
1.51 to 1.79 V
Left switch pushed
2.22 to 2.66 V
I155-25 (ADPG) - I152-7 (GND1)
G - BR
External device connection detection signal
External device connected
Below 1 V
I155-26 (VAR+) - I155-27 (VA-)
B - W
Sound signal (Right)
External device playing (When stereo jack used)
A waveform synchronized with sounds is output
I155-27 (VA-) - I152-7 (GND1)
W - BR
Ground
Always
Below 1 V
I155-28 (VAL+) - I155-27 (VA-)
R - W
Sound signal (Left)
External device playing (When stereo jack used)
A waveform synchronized with sounds is output
I154-6 (PKB) - I152-7 (GND1)
R - BR
Parking brake signal
See "Vehicle Signal Check Mode" in Operation Check (Click here)
-
I154-7 (CA+) - I152-7 (GND1)*2
B - BR
Television camera power supply
Ignition switch ON
Shift lever in R
5.5 to 7.05 V
I154-8 (V+) - I152-7 (GND1)*2
W - BR
Video signal
Ignition switch ON
Shift lever in R
Camera lens not covered, displaying an image
Pulse generation
(Refer to waveform 1)
Ignition switch ON
Shift lever in R
Camera lens covered, blacking out screen
Pulse generation
(Refer to waveform 2)
I154-15 (CGND) - Body ground*2
Shield - Body ground
Shield ground
Always
Below 1 V
I154-16 (V-) - I152-7 (GND1)*2
R - BR
Ground
Always
Below 1 V
I156-1 (USV1)*3
I156-1 (UPO)*4
-
Power source
-
-
I156-2 (US1-)*3
I156-2 (UDO-)*4
-
Data signal
-
-
I156-3 (US1+)*3
I156-3 (UDO+)*4
-
Data signal
-
-
I156-4 (UGD1)*3
I156-4 (UPSG)*4
-
Ground
-
-
I156-5 (USG1)
-
Shield ground
-
-
RA-5 (ANT+) - I152-7 (GND1)
R - BR
Power source of antenna
Ignition switch ACC
Radio switch on and FM or AM selected
11 to 14 V
  1. *1: w/ Cooler Control Switch Assembly
  2. *2: w/ Rear View Monitor System
  3. *3: for LHD
  4. *4: for RHD


    E171712E20
  1. Reference (Oscilloscope waveform):

    1. Waveform 1 (camera lens not covered, displaying an image)
      Item
      Content
      Measurement terminal
      I154-8 (V+) - I152-7 (GND1)
      Measurement setting
      200 mV/DIV., 50 μsec./DIV.
      Condition
      Ignition switch ON, Shift lever in R

      HINT:
      The video waveform changes according to the image sent by the television camera assembly.

    2. Waveform 2 (camera lens covered, blacking out the screen)
      Item
      Content
      Measurement terminal
      I154-8 (V+) - I152-7 (GND1)
      Measurement setting
      200 mV/DIV., 50 μsec./DIV.
      Condition
      Ignition switch ON, Shift lever in R

      HINT:
      The video waveform changes according to the image sent by the rear television camera assembly.

      Text in Illustration 
      *a
      Waveform 1 (camera lens not covered, displaying an image)
      *b
      Waveform 2 (camera lens covered, blacking out the screen)
      *c
      Synchronization Signal
      *d
      Video Waveform


COOLER CONTROL SWITCH ASSEMBLY

E228222E02


Terminal No.
(Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
X1-1 (+B) - X1-16 (GND)
R - W-B
Power source (+B)
Always
11 to 14 V
X1-5 (TX-)
Y
AVC-LAN communication signal
-
-
X1-6 (ACC) - X1-16 (GND)
GR - W-B
Power source (ACC)
Ignition switch off
Below 1 V
Ignition switch ACC
11 to 14 V
X1-7 (IG+) - X1-16 (GND)
V - W-B
Power source (IG)
Ignition switch off
Below 1 V
Ignition switch ON
11 to 14 V
X1-15 (TX+)
GR
AVC-LAN communication signal
-
-
X1-16 (GND) - Body ground
W-B - Body ground
Ground for cooler control switch assembly
Always
Below 1 V