REAR AXLE HUB BOLT > REPLACEMENT |
| 1. REMOVE REAR WHEEL |
| 2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY |
![]() |
Remove the bolt and separate the rear flexible hose from the rear shock absorber assembly.
Remove the 2 bolts, and separate the rear disc brake caliper assembly.
| 3. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG |
Remove the parking brake shoe adjusting hole plug.
| 4. REMOVE REAR DISC |
![]() |
Put matchmarks on the rear disc and the rear axle hub.
| *a | Matchmark |
![]() |
Release the parking brake and remove the rear disc.
| 5. REMOVE REAR AXLE HUB BOLT |
![]() |
Temporarily install 2 nuts to the rear axle hub bolts as shown in the illustration.
| *1 | Nut |
Using SST and a screwdriver or an equivalent tool to hold the rear axle hub and bearing assembly, remove the rear axle hub bolt.
| 6. INSTALL REAR AXLE HUB BOLT |
![]() |
Temporarily install a new rear axle hub bolt to the rear axle hub and bearing assembly.
| *1 | Nut |
| *2 | Washer |
Install a washer and nut to the rear axle hub bolt as shown in the illustration.
Using a screwdriver or an equivalent tool to hold the rear axle hub and bearing assembly, install the rear axle hub bolt by tightening the nut.
Remove the 3 nuts and washer from the 3 rear axle hub bolts.
| 7. INSTALL REAR DISC |
![]() |
Align the matchmarks of the rear disc and rear axle hub, and install the rear disc.
| *a | Matchmark |
| 8. INSTALL PARKING BRAKE SHOE ADJUSTING HOLE PLUG |
Install the parking brake shoe adjusting hole plug.
| 9. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY |
Install the rear disc brake caliper assembly with the 2 bolts.
Install the rear flexible hose to the rear shock absorber assembly with the bolt.
| 10. ADJUST PARKING BRAKE |
| 11. INSTALL REAR WHEEL |