VALVE BODY ASSEMBLY > INSTALLATION |
| 1. INSTALL MANUAL VALVE |
Install the manual valve to the transmission valve body assembly.
| 2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY |
Install the spring and check ball body to the transmission valve body assembly.
![]() |
Align the groove of the manual valve with the pin of the lever.
Coat the 17 bolts with ATF.
Install the transmission valve body assembly to the automatic transaxle assembly with the 17 bolts.
Coat the O-ring of the ATF temperature sensor and bolt with ATF.
Install the ATF temperature sensor with the lock plate and bolt.
Connect the 5 connectors to the transmission valve body assembly.
| 3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY |
Coat a new O-ring with ATF.
Install the O-ring to the valve body oil strainer assembly.
Coat the 3 bolts with ATF.
Install the valve body oil strainer assembly to the transmission valve body assembly with the 3 bolts.
| 4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY |
![]() |
Install the 2 magnets in the automatic transaxle oil pan sub-assembly.
| *1 | Magnet |
Clean and degrease the bolt holes.
Apply adhesive to 18 new bolts.
Install a new gasket and the automatic transaxle oil pan sub-assembly with the 18 bolts.
| 5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY |