REAR SEAT ASSEMBLY (for Reclining Seat Type) > INSTALLATION |
| 1. INSTALL CENTER SEATBACK ASSEMBLY |
Place the center seatback assembly in the cabin.
Engage the hook.
Install the center seatback assembly with the 2 bolts.
Connect the connector.
| 2. INSTALL REAR SEATBACK ASSEMBLY LH |
Place the rear seatback assembly LH in the cabin.
Install the rear seatback assembly LH with the 2 bolts and 2 nuts.
Engage the 2 hooks to install the cover.
Connect the 2 rear seat belts to the 2 rear seat shoulder belt guides.
w/ Rear Seat Side Airbag:
Connect each connector and clamp to the child restraint anchor bracket sub-assembly LH.
| 3. INSTALL REAR SEATBACK ASSEMBLY RH |
Place the rear seatback assembly RH in the cabin.
Install the rear seatback assembly RH with the 2 bolts and 2 nuts.
Engage the 2 hooks to install the cover.
Connect the rear seat belt to the rear seat shoulder belt guide.
w/ Rear Seat Side Airbag:
Connect each connector and clamp to the child restraint anchor bracket sub-assembly RH.
| 4. INSTALL REAR SEATBACK COVER |
Engage the 4 claws to install the 2 rear seatback covers.
| 5. INSTALL REAR SEAT CUSHION LOCK HOOK |
![]() |
Engage the claw to install a new rear seat cushion lock hook.
| 6. INSTALL REAR SEAT CUSHION ASSEMBLY |
Place the rear seat cushion assembly in the cabin.
w/ Seat Heater System:
Connect the 2 seat heater connectors.
![]() |
Engage the 2 hooks of the rear seat cushion assembly to the vehicle body as shown in the illustration.
Confirm that the rear seat cushion assembly is firmly installed.
| 7. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY |
| 8. INSTALL REAR SEAT HEADREST ASSEMBLY |
| 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag) |
| 10. INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag) |