REAR SEAT ASSEMBLY (for Reclining Seat Type) > REMOVAL |
| 1. PRECAUTION (w/ Rear Seat Side Airbag) |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag) |
| 3. REMOVE REAR SEAT HEADREST ASSEMBLY |
| 4. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY |
| 5. REMOVE REAR SEAT CUSHION ASSEMBLY |
![]() |
Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.
| a | 100 mm (3.94 in.) or less |
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat the step above for the other hook.
w/ Seat Heater System:
Disconnect the 2 seat heater connectors.
Remove the rear seat cushion assembly.
| 6. REMOVE REAR SEAT CUSHION LOCK HOOK |
![]() |
Disengage the claw and remove the rear seat cushion lock hook.
| 7. REMOVE REAR SEATBACK COVER |
![]() |
Disengage the 4 claws and remove the 2 rear seatback covers.
| 8. REMOVE REAR SEATBACK ASSEMBLY LH |
w/ Rear Seat Side Airbag:
Disconnect each connector and clamp from the child restraint seat anchor bracket sub-assembly LH.
Disengage the 2 rear seat belts from the 2 rear seat shoulder belt guides.
![]() |
Disengage the 2 hooks and disconnect the cover.
Remove the 2 nuts, 2 bolts and rear seatback assembly LH.
| 9. REMOVE REAR SEATBACK ASSEMBLY RH |
w/ Rear Seat Side Airbag:
Disconnect each connector and clamp from the child restraint seat anchor bracket sub-assembly RH.
Disengage the rear seat belt from the rear seat shoulder belt guide.
![]() |
Disengage the 2 hooks and disconnect the cover.
Remove the 2 nuts, 2 bolts and rear seatback assembly RH.
| 10. REMOVE CENTER SEATBACK ASSEMBLY |
Disconnect the connector.
![]() |
Remove the 2 bolts.
Disengage the hook and remove the center seatback assembly as shown in the illustration.