Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › ULTRASONIC SENSOR (for Front Side)

ULTRASONIC SENSOR (for Front Side) > REMOVAL

for Preparation Click here



1. REMOVE FRONT BUMPER ASSEMBLY
(Click here)


2. REMOVE NO. 1 ULTRASONIC SENSOR


  1. for TMC Made:



      E228021E01
    1. Disconnect the connector.
      Text in Illustration 
      *A
      LH Side
      *B
      RH Side



    E228019E01
  1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side



3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER


    E228020E01
  1. Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the front bumper assembly.
    Text in Illustration 
    *A
    LH Side
    *B
    RH Side