Home › Engine / Hybrid System ยท 1AZ-FE › EMISSION CONTROL › CANISTER

CANISTER > INSTALLATION

for Preparation Click here



1. INSTALL CHARCOAL CANISTER ASSEMBLY
  1. Install the charcoal canister assembly with the 2 bolts and clip.

    Torque:
    39 N*m{ 398 kgf*cm , 29 ft.*lbf }



    A268179E01
  1. Connect the air line hose and purge line hose.
    Text in Illustration 
    *a
    2 to 7 mm (0.0787 to 0.276 in.)
    *b
    90°
    *c
    Front Side
    *d
    180°
    *e
    Upper Side

  1. Connect the wire harness clamp.



2. INSTALL FUEL TANK ASSEMBLY
(Click here)