2 or more ECUs and/or sensors do not appear on the intelligent tester "Communication Bus Check" screen.
| One side of CAN branch line is open, or output signals are incomplete.
- AFS ECU*1
- ECM
- Main body ECU (Multiplex network body ECU)
- Combination meter assembly
- Brake actuator assembly
- Steering sensor
- Clearance warning ECU assembly*2
- Power steering ECU with motor assembly
- Airbag sensor assembly
- Air conditioning amplifier assembly
- Smart key ECU assembly (Certification ECU)*3
- Navigation ECU sub-assembly*4
- Radio and display receiver assembly*5
|