REAR POWER OUTLET SOCKET > REMOVAL |
| 1. PRECAUTION (w/ Rear Seat Side Airbag) |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag) |
| 3. REMOVE REAR SEAT HEADREST ASSEMBLY |
| 4. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY |
| 5. REMOVE REAR SEAT CUSHION ASSEMBLY |
![]() |
Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.
| a | 100 mm (3.94 in.) or less |
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat the step above for the other hook.
w/ Seat Heater System:
Disconnect the 2 seat heater connectors.
Remove the rear seat cushion assembly.
| 6. REMOVE REAR SEAT CUSHION LOCK HOOK |
![]() |
Disengage the claw and remove the rear seat cushion lock hook.
| 7. REMOVE REAR SEATBACK COVER |
![]() |
Disengage the 4 claws and remove the 2 rear seatback covers.
| 8. REMOVE REAR SEATBACK ASSEMBLY LH |
w/ Rear Seat Side Airbag:
Disconnect each connector and clamp from the child restraint seat anchor bracket sub-assembly LH.
Disengage the 2 rear seat belts from the 2 rear seat shoulder belt guides.
![]() |
Disengage the 2 hooks and disconnect the cover.
Remove the 2 nuts, 2 bolts and rear seatback assembly LH.
| 9. REMOVE REAR SEATBACK ASSEMBLY RH |
w/ Rear Seat Side Airbag:
Disconnect each connector and clamp from the child restraint seat anchor bracket sub-assembly RH.
Disengage the rear seat belt from the rear seat shoulder belt guide.
![]() |
Disengage the 2 hooks and disconnect the cover.
Remove the 2 nuts, 2 bolts and rear seatback assembly RH.
| 10. REMOVE CENTER SEATBACK ASSEMBLY |
Disconnect the connector.
![]() |
Remove the 2 bolts.
Disengage the hook and remove the center seatback assembly as shown in the illustration.
| 11. REMOVE CENTER SEAT ARMREST INNER PLATE |
![]() |
Disengage the 6 claws and separate the 4 guides, and remove the center seat armrest inner plate.
| 12. REMOVE REAR CENTER SEATBACK FRAME WITH COVER AND PAD |
![]() |
Remove the 2 nuts.
Disengage the 2 claws and remove the rear center seatback frame with cover and pad.
| 13. REMOVE CENTER SEAT ARMREST BRACKET SUB-ASSEMBLY |
![]() |
Disengage the 3 clamps.
Remove the 2 bolts, 2 washers and center seat armrest bracket sub-assembly.
| 14. REMOVE REAR SEAT CENTER ARMREST BOX ASSEMBLY |
![]() |
Disengage the 4 hooks and remove the rear seat center armrest box assembly from the rear seat center armrest.
| 15. REMOVE COOLER CONTROL SWITCH ASSEMBLY |
![]() |
Remove the 2 screws.
Separate the guide and remove the rear seat center armrest door sub-assembly.
![]() |
Remove the screw.
Using a moulding remover, disengage the 8 claws and 3 guides, and remove the rear seat armrest plate.
![]() |
Disengage the 4 claws.
![]() |
Disconnect each connector to remove the cooler control switch assembly.
| 16. REMOVE REAR NO. 1 POWER OUTLET SOCKET ASSEMBLY |
![]() |
Disengage the guide.
![]() |
Disengage the 3 clamps and turn back the rear seat center armrest cover as shown in the illustration.
![]() |
Disconnect the connector.
![]() |
Using a screwdriver, disengage the claw and remove the rear No. 1 power outlet socket assembly as shown in the illustration.
| *1 | Protective Tape |
| 17. REMOVE REAR POWER OUTLET SOCKET COVER |
![]() |
Disengage the 2 claws and remove the rear power outlet socket cover as shown in the illustration.