AIR CONDITIONING AMPLIFIER > REMOVAL |
| 1. PRECAUTION (for LHD) |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for LHD) |
| 3. REMOVE FRONT DOOR SCUFF PLATE |
| 4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY |
| 5. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP |
| 6. REMOVE INSTRUMENT SIDE PANEL |
| 7. REMOVE FRONT PANEL GARNISH |
| 8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
![]() |
Disengage the 4 claws.
Disengage the 2 guides.
Disconnect the connector to remove the No. 2 instrument panel under cover sub-assembly.
| 9. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
![]() |
Remove the bolt <B> and screw <C>.
Open the lower instrument panel door.
![]() |
Remove the 3 screws <C>.
![]() |
Disengage the 2 clips, 4 guides and remove the lower instrument panel sub-assembly as shown in the illustration.
| 10. REMOVE ECU INTEGRATION BOX RH (for LHD) |
for LHD:
Disconnect each connector.
![]() |
Remove the bolt, 2 nuts and ECU integration box RH.
for RHD:
Disconnect each connector.
![]() |
Remove the bolt, 2 nuts and ECU integration box RH.
| 11. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY |
Disconnect each connector.
for LHD:
![]() |
Remove the 2 screws.
Disengage the 2 guides and remove the air conditioning amplifier assembly.
for RHD:
![]() |
Remove the 2 screws.
Disengage the 2 guides and remove the air conditioning amplifier assembly.