FRONT SEAT CUSHION HEATER > REMOVAL |
| 1. REMOVE FRONT SEAT ASSEMBLY |
| 2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Disconnect the rubber band of the separate type front seatback cover.
| 3. REMOVE NO. 1 FRONT SEAT INNER CUSHION SHIELD |
![]() |
Remove the screw.
Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.
![]() |
Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.
| 4. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side) |
![]() |
Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.
![]() |
Disengage the 2 claws and open the wire harness cover.
| *1 | Wire Harness Cover |
Remove the wire harness from the wire harness cover.
Disengage the 2 wire harness clamps.
Disconnect the front power seat switch connector.
![]() |
Disconnect the front lumbar power seat switch connector.
| 5. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side) |
![]() |
Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.
![]() |
Disengage the 3 claws and open the wire harness cover.
| *1 | Wire Harness Cover |
Remove the wire harness from the wire harness cover.
Disengage the 2 wire harness clamps.
Disconnect the front power seat switch connector.
| 6. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side) |
![]() |
Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.
| 7. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side) |
![]() |
Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.
| 8. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
![]() |
Disengage the fastener and separate the front seat airbag assembly wire harness.
![]() |
Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.
w/ Seat Heater System:
![]() |
Disconnect the connector.
Disengage the clamp.
![]() |
Disconnect the connector.
Disengage the 2 clamps to separate the seat heater wire harness.
![]() |
Disengage the hook.
![]() |
Disengage each hook and remove the separate type front seat cushion cover with pad.
| 9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Remove the 2 hog rings.
![]() |
Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.