FRONT SUSPENSION MEMBER > REMOVAL |
| 1. REMOVE FRONT FRAME ASSEMBLY |
| 2. REMOVE FRONT ENGINE MOUNTING INSULATOR |
| 3. REMOVE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY (for 2GR-FE) |
| 4. REMOVE ENGINE MOUNTING INSULATOR LH |
| 5. REMOVE ENGINE MOUNTING INSULATOR RH |
| 6. REMOVE FRONT NO. 1 STABILIZER BRACKET LH |
![]() |
Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.
| 7. REMOVE FRONT NO. 1 STABILIZER BRACKET RH |
| 8. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY |
Remove the front stabilizer bar with 2 front stabilizer link assemblies from the front frame assembly.
| 9. REMOVE STEERING LINK ASSEMBLY |
![]() |
Remove the 2 bolts, 2 nuts and steering link assembly.
| 10. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH |
![]() |
Remove the 3 bolts, nut and front lower No. 1 suspension arm sub-assembly from the front frame assembly.
Remove the front lower arm bushing stopper from the front lower No. 1 suspension arm sub-assembly.
| 11. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH |
| 12. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER |
![]() |
Remove the 2 bolts and front suspension member dynamic damper from the front frame assembly.
| 13. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER |
Remove the 2 front suspension member body mounting front stoppers from the front frame assembly.
| 14. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER |
Remove the 2 front suspension member body mounting rear stoppers from the front frame assembly.
| 15. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION |
![]() |
Install SST as shown in the illustration.
| *1 | Front Suspension Member Body Mounting Front Cushion |
![]() |
Using SST, remove each front suspension member body mounting front cushion from the front frame assembly.
| *a | Turn |
| *b | Hold |
| 16. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH |
![]() |
Install SST as shown in the illustration.
| *1 | Front Suspension Member Body Mounting Rear Cushion LH |
![]() |
Using SST, remove the front suspension member body mounting rear cushion LH from the front frame assembly.
| *a | Turn |
| *b | Hold |
| 17. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH |
| 18. REMOVE HOLE PLUG |
Remove each hole plug from the front frame assembly.