REAR COMBINATION LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL REAR COMBINATION LIGHT ASSEMBLY |
Install the rear combination light assembly with the 4 nuts.
Engage the clamp.
Connect each connector.
| 2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER |
Install the 3 clips.
Engage the fastener and install the luggage compartment inner trim cover LH.
| 3. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
![]() |
Engage the pin to install the No. 1 luggage compartment trim hook.
| *1 | Pin |
| 4. INSTALL REAR FLOOR FINISH PLATE |
![]() |
Engage the 4 clips and install the rear floor finish plate.
Install the 5 clips.
| 5. INSTALL BAGGAGE HOLDER NET (w/ Partition Net) |
Install the baggage holder net.
| 6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT |
Install the luggage compartment floor mat.
| 7. INSTALL REAR BUMPER ASSEMBLY |