REAR COMBINATION LIGHT ASSEMBLY > REMOVAL |
| 1. REMOVE REAR BUMPER ASSEMBLY |
| 2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT |
Remove the luggage compartment floor mat.
| 3. REMOVE BAGGAGE HOLDER NET (w/ Partition Net) |
Remove the baggage holder net.
| 4. REMOVE REAR FLOOR FINISH PLATE |
![]() |
Remove the 5 clips.
![]() |
Disengage the 4 clips and remove the rear floor finish plate.
| 5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
![]() |
Push the pin and remove the No. 1 luggage compartment trim hook.
| *1 | Pin |
| 6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER |
![]() |
Remove the 3 clips.
Disengage the fastener and remove the luggage compartment inner trim cover LH.
| 7. REMOVE REAR COMBINATION LIGHT ASSEMBLY |
![]() |
Disconnect each connector.
Disengage the clamp.
![]() |
Remove the 4 nuts and rear combination light assembly.