NAVIGATION ANTENNA > REMOVAL |
| 1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY |
| 2. REMOVE NO. 1 HEATER TO REGISTER DUCT (except LHD with Ion Generator) |
![]() |
Remove the clip.
Remove the 3 screws <C> and No. 1 heater to register duct.
| 3. REMOVE HEATER TO REGISTER DUCT ASSEMBLY (for LHD with Ion Generator) |
![]() |
Remove the clip.
Remove the 3 screws <C>.
Disengage the heater to register duct assembly from the ion generator assembly, to remove the heater to register duct.
| 4. REMOVE NO. 3 HEATER TO REGISTER DUCT (for LHD) |
![]() |
Remove the clip.
Remove the 3 screws <C> and No. 3 heater to register duct.
| 5. REMOVE HEATER TO REGISTER DUCT ASSEMBLY (for RHD) |
![]() |
Remove the clip.
Remove the 3 screws <C>.
Disengage the heater to register duct assembly from the ion generator assembly, to remove the heater to register duct.
| 6. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Remove the screw <C>.
Disengage the 2 claws to remove the No. 1 side defroster nozzle duct.
| 7. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Remove the screw <C>.
Disengage the 2 claws to remove the No. 2 side defroster nozzle duct.
| 8. REMOVE DEFROSTER NOZZLE ASSEMBLY |
![]() |
Remove the 3 screws <C>.
Disengage the 2 guides to remove the defroster nozzle assembly.
| 9. REMOVE NAVIGATION ANTENNA ASSEMBLY |
![]() |
Remove the 2 screws.
Disengage the 2 clamps and remove the navigation antenna assembly.