BLOCKING SYSTEM > DTC CHECK / CLEAR |
| CHECK FOR TELEPHONE TRANSCEIVER ASSEMBLY DTC |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Telematics Transceiver / DTC.
Check for DTCs.
Check the details of the DTCs (Click here).
| CHECK FOR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry & Start / DTC.
Check for DTCs.
Check the details of the DTCs (Click here).
| CHECK FOR ECM DTC |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Check for DTCs.
Check the details of the DTCs (Click here).
| CLEAR TELEPHONE TRANSCEIVER ASSEMBLY DTC |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Telematics Transceiver / DTC.
Press the YES button.
Clear the DTCs.
| CLEAR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry & Start / DTC.
Press the YES button.
Clear the DTCs.
| CLEAR ECM DTC |
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Press the YES button.
Clear the DTCs.