Home › Steering › STEERING COLUMN › TILT AND TELESCOPIC MANUAL SWITCH

TILT AND TELESCOPIC MANUAL SWITCH > INSPECTION

for Preparation Click here



1. INSPECT TILT AND TELESCOPIC SWITCH


    C240949E01
  1. Remove the tilt and telescopic switch (Click here).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1(VC) - 3(MSW)
    Tilt up
    342 to 378 Ω
    Tilt down
    1890.5 to 2089.5 Ω
    Telescopic contract
    750.5 to 829.5 Ω
    Telescopic extend
    152 to 168 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (Tilt and Telescopic Switch)