POWER SEAT SWITCH (for Rear Side) > INSTALLATION |
| 1. INSTALL COOLER CONTROL SWITCH ASSEMBLY |
Set the rear seat armrest plate to the rear seat center armrest box assembly.
Connect each connector to the cooler control switch assembly.
Engage the 4 claws to install the cooler control switch assembly.
Engage the 3 guides and 8 claws.
Install the rear seat armrest plate with the screw.
Insert the guide.
Install the rear seat center armrest door sub-assembly with the 2 screws.
| 2. INSTALL REAR SEAT CENTER ARMREST BOX ASSEMBLY |
![]() |
Engage the 4 hooks to install the rear seat center armrest box assembly to the rear seat center armrest assembly.
| 3. INSTALL CENTER SEAT ARMREST BRACKET SUB-ASSEMBLY |
![]() |
Install the center seat armrest bracket sub-assembly with the 2 bolts and 2 washers.
Engage the 3 clamps.
| 4. INSTALL REAR CENTER SEATBACK FRAME WITH COVER AND PAD |
![]() |
Engage the 2 claws.
Install the rear center seatback frame with cover and pad with the 2 nuts.
| 5. INSTALL CENTER SEAT ARMREST INNER PLATE |
![]() |
Insert the 4 guides and engage the 6 claws to install the center seat armrest inner plate.
| 6. INSTALL CENTER SEATBACK ASSEMBLY |
Place the center seatback assembly in the cabin.
Engage the hook.
Install the center seatback assembly with the 2 bolts.
Connect the connector.
| 7. INSTALL REAR SEATBACK ASSEMBLY LH |
Place the rear seatback assembly LH in the cabin.
Install the rear seatback assembly LH with the 2 bolts and 2 nuts.
Engage the 2 hooks to install the cover.
Connect the 2 rear seat belts to the 2 rear seat shoulder belt guides.
w/ Rear Seat Side Airbag:
Connect each connector and clamp to the child restraint anchor bracket sub-assembly LH.
| 8. INSTALL REAR SEATBACK ASSEMBLY RH |
Place the rear seatback assembly RH in the cabin.
Install the rear seatback assembly RH with the 2 bolts and 2 nuts.
Engage the 2 hooks to install the cover.
Connect the rear seat belt to the rear seat shoulder belt guide.
w/ Rear Seat Side Airbag:
Connect each connector and clamp to the child restraint anchor bracket sub-assembly RH.
| 9. INSTALL REAR SEATBACK COVER |
Engage the 4 claws to install the 2 rear seatback covers.
| 10. INSTALL REAR SEAT CUSHION LOCK HOOK |
![]() |
Engage the claw to install a new rear seat cushion lock hook.
| 11. INSTALL REAR SEAT CUSHION ASSEMBLY |
Place the rear seat cushion assembly in the cabin.
w/ Seat Heater System:
Connect the 2 seat heater connectors.
![]() |
Engage the 2 hooks of the rear seat cushion assembly to the vehicle body as shown in the illustration.
Confirm that the rear seat cushion assembly is firmly installed.
| 12. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY |
| 13. INSTALL REAR SEAT HEADREST ASSEMBLY |
| 14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag) |
| 15. INSPECT SRS WARNING LIGHT (w/ Rear Seat Side Airbag) |