WIPER AND WASHER SYSTEM > PRECAUTION |
| 1.PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL |
| System | See Procedure |
| Parking Assist Monitor System |
Click here
|
| 2.IGNITION SWITCH EXPRESSIONS |
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
| Ignition Switch off | LOCK | Off |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | Start |
| 3.PRECAUTION OF WASHER NOZZLE ADJUSTMENT |
Do not clean or adjust the washer nozzle with a safety pin, etc. because;
the washer nozzle tip is made of resin and could be damaged.
adjustment is not necessary because the washer nozzle is a spray type. If it is necessary to change the nozzle angle, replace the washer nozzle with one that has a different nozzle angle. (Click here)
If the washer nozzle is clogged with wax, etc., remove it and clean the nozzle hole with a soft resin brush, etc.