Home › Engine / Hybrid System ยท CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > DIAGNOSIS SYSTEM

for Preparation Click here



DESCRIPTION
The ECM controls the cruise control system of the vehicle. The data and DTCs relating to the cruise control system can be read from the DLC3 of the vehicle. Use the Techstream to check and solve the problem.

HINT:
If a vehicle speed sensor, stop light switch or any other related part malfunctions, the ECM cancels cruise control operation automatically.


CHECK DLC3
  1. Check the DLC3 (Click here).


CHECK INDICATOR


    A222996E01
  1. Turn the ignition switch to ON.
    Text in Illustration 
    *1
    Cruise Control Indicator Light (Green)

  2. Check that the cruise control indicator light illuminates in green when the cruise control system is turned on using the cruise control switch (ON-OFF button), and that the indicator light turns off when the cruise control system is turned off using the cruise control switch (ON-OFF button). If the results are not as specified, perform the Cruise Main Indicator Light Circuit inspection procedure (Click here).

    HINT:
    While driving with the cruise control system controlling vehicle speed, the ECM will automatically cancel cruise control system control of vehicle speed when a malfunction occurs in one of the following: vehicle speed sensors, stop light switch assembly, or other related parts. When control of vehicle speed by the cruise control system is automatically canceled, the cruise control indicator changes to amber (w/o Multi-information Display) or the cruise control indicator light goes out and a warning message is displayed (w/ Multi-information Display). At the same time, a DTC is stored.