HIGH INTENSITY DISCHARGE HEADLIGHT BULB > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY |
Disconnect the connector.
for LH Side:
![]() |
Turn the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect it.
for RH Side:
![]() |
Turn the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect it.
![]() |
Disengage the clamp.
Turn the socket of the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and remove it.
| 4. REMOVE DISCHARGE HEADLIGHT BULB |
![]() |
Release the set spring as shown in the illustration and remove the discharge headlight bulb.