Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > INSTALLATION

for Preparation Click here



1. INSTALL BLOWER ASSEMBLY WITH COOLER EVAPORATOR SUB-ASSEMBLY
  1. Engage the 2 claws.

  1. Install the blower assembly with cooler evaporator sub-assembly with the 6 screws.

  1. Engage the 3 clamps.



2. INSTALL AIR CONDITIONING HARNESS ASSEMBLY (for Manual Air Conditioning System)


    E227197
  1. Engage the 5 clamps to install air conditioning harness assembly.

  1. Connect the 4 connectors.



    E227196
  1. Install the heater packing as shown in the illustration.



3. INSTALL AIR CONDITIONING HARNESS ASSEMBLY (for Automatic Air Conditioning System)


    E228262
  1. Engage the 5 clamps to install air conditioning harness assembly.

  1. Connect the 5 connectors.



    E227196
  1. Install the heater packing as shown in the illustration.



4. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
  1. Engage the 2 guides.

  1. Install the air conditioning amplifier assembly with the 2 screws.

  1. Connect each connector.



5. INSTALL NO. 6 HEATER TO REGISTER DUCT ASSEMBLY


    E227194
  1. Engage the 2 claws and 2 guides to install the No. 6 heater to register duct assembly as shown in the illustration.



6. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY


    E227192
  1. Engage the 2 claws and guide to install the No. 1 air duct sub-assembly as shown in the illustration.



7. INSTALL AIR CONDITIONING UNIT ASSEMBLY
(Click here)