FUEL PUMP > REMOVAL |
| 1. PRECAUTION |
| 2. DISCHARGE FUEL SYSTEM PRESSURE |
| 3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 4. REMOVE REAR SEAT CUSHION ASSEMBLY |
Disengage the hook of the seat cushion from the vehicle body as shown in the illustration.
![]() |
Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.
| a | 100 mm (3.94 in.) or less |
Repeat the step above for the other hook.
Remove the rear seat cushion assembly.
| 5. REMOVE REAR SEAT CUSHION LOCK HOOK |
![]() |
Disengage the claw and remove the rear seat cushion lock hook.
| 6. REMOVE REAR FLOOR SERVICE HOLE COVER |
![]() |
Remove the rear floor service hole cover.
Disconnect the fuel pump connector.
| 7. DISCONNECT FUEL TANK VENT HOSE |
![]() |
Pull the tabs of the retainer to disengage the lock claws and pull out the fuel tank vent hose.
| *1 | Retainer |
| 8. DISCONNECT FUEL TANK BREATHER ELBOW TUBE SUB-ASSEMBLY |
![]() |
Remove the tube joint clip, and pull out the fuel tube joint of the fuel tank breather elbow tube sub-assembly.
| *1 | Tube Joint Clip |
| *2 | Fuel Tube Joint |
| *3 | Fuel Tank Breather Tube |
| *4 | O-ring |
| *5 | Fuel Suction Plate |
| 9. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY |
![]() |
Remove the tube joint clip, and pull out the fuel tube joint of the fuel tank main tube sub-assembly.
| *1 | Tube Joint Clip |
| *2 | Fuel Tube Joint |
| *3 | Fuel Tank Main Tube |
| *4 | O-ring |
| *5 | Fuel Suction Plate |
| 10. REMOVE FUEL TANK VENT TUBE SET PLATE |
![]() |
Remove the 8 bolts and set plate.
| 11. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY |
![]() |
Using a screwdriver with its tip wrapped in protective tape, pull the tabs of the retainer to disengage the lock claws and pull out the fuel cut-off tube.
| *1 | Retainer |
| *2 | Fuel Cut-off Tube |
| *3 | Fuel Suction Tube Set Gasket |
Remove the fuel suction tube with pump and gauge assembly from the fuel tank.
Remove the fuel suction tube set gasket from the fuel suction tube assembly.