LUGGAGE COMPARTMENT DOOR > REASSEMBLY |
| 1. INSTALL REAR LIGHT ASSEMBLY LH |
![]() |
Install the rear light assembly with the 3 nuts.
Connect the connector.
| 2. INSTALL REAR LIGHT ASSEMBLY RH |
| 3. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH |
Engage the 2 claws to install the license plate light assembly.
Connect the connector.
| 4. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH |
| 5. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor) |
Engage the 2 claws to install the rear television camera assembly.
Connect the connector.
| 6. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
Install 6 new gaskets to the luggage compartment door outside garnish sub-assembly.
Install new clip (back door outside garnish clip) and 2 new clips to the luggage compartment door outside garnish sub-assembly.
![]() |
Engage the 3 clips to install the luggage compartment door outside garnish sub-assembly.
w/ Wireless Door Lock Control System:
Install the 6 nuts.
w/o Wireless Door Lock Control System:
Install the 4 nuts.
w/ Smart Key System:
Connect the connector.
| 7. INSTALL REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler) |
When replacing the rear spoiler with a new one:
Install the 2 stud bolts to the rear spoiler.
Install 2 new gaskets to the rear spoiler.
Install 4 new clips to the rear spoiler.
Clean the rear spoiler.
Remove any double-sided tape from the rear spoiler.
Wipe off any tape adhesive residue with cleaner.
Install a new No. 2 rear spoiler protector.
Remove the release paper from the No. 2 rear spoiler protector.
Install a new No. 2 rear spoiler protector.
Install the No. 1 rear spoiler protector.
Remove the release paper from the No. 1 rear spoiler protector.
Install the No. 1 rear spoiler protector as shown in the illustration.

| Dimension | Measurement | Dimension | Measurement |
| A | 5.0 mm (0.197 in.) | B | 5.0 mm (0.197 in.) |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Install the rear spoiler sub-assembly.
Using a heat light, heat the vehicle body and rear spoiler sub-assembly.
Remove the release paper from the rear spoiler sub-assembly.
![]() |
Engage the 4 clips.
Install the rear spoiler sub-assembly with the 2 nuts.
| 8. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY (w/o Wireless Door Lock Control System) |
![]() |
Install the luggage compartment door lock cylinder assembly with the 2 nuts.
![]() |
Connect the luggage door lock control cable sub-assembly.
| 9. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/ Wireless Door Lock Control System) |
Apply MP grease to the sliding parts of the luggage compartment door lock assembly.
Engage the luggage door lock control cable sub-assembly.
![]() |
Engage the claw as shown in the illustration.
Install the luggage compartment door lock assembly with the 2 bolts.
Connect the connector.
| 10. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/o Wireless Door Lock Control System) |
Apply MP grease to the sliding parts of the luggage compartment door lock assembly.
Install the luggage compartment door lock assembly with the 2 bolts.
Connect the connector.
Connect the luggage door lock control cable sub-assembly.
| 11. INSTALL LUGGAGE COMPARTMENT DOOR CUSHION |
![]() |
Engage the 2 claws and install the 2 new luggage compartment door panel cushions.
| 12. INSTALL LUGGAGE COMPARTMENT DOOR COVER |
![]() |
Install the luggage compartment door cover with the 13 clips.
| 13. ADJUST REAR TELEVISION CAMERA ASSEMBLY OPTICAL AXIS (w/ Parking Assist Monitor System) |